Sony KV-40XBR700 User Guide

If your cable provider does not feature local channels, you may find 
this set-up convenient.

Select CABLE or antenna (ANT) mode by pressing ANT on the remote 
control.

Select antenna mode by pressing ANT on the remote control.

Turn the cable to OFF (see page 40).

Perform the Auto Program function (see page 40).

This is the preferred basic cable TV hookup to use if your cable TV 
company scrambles some channels, but not all of them (pay channels 
vs. regular cable channels), so you need to use a cable box.

With this setup you can:

❑

Use the TV remote control to change channels using your cable 
box when the signal is scrambled.

❑

Use the TV remote control to change channels using your TV 
when the signal is not scrambled. (Your TV’s tuner provides a 
better signal than the cable box.)

❑

Use the Twin View feature. (When all channels are routed 
through your cable box, only one signal is sent to the TV, so you 
can not use the Twin View feature.)

❑

Use the Twin View feature normally with the CATV input.

❑

Use the Twin View feature partially with the cable box. (When 
you switch the TV input to AUX - to use the cable box - the 
unscrambled picture from the cable box will display. You can 
display the signal from both AUX and VHF/UHF inputs in the 
left Twin View picture, but you can display only the signal from 
the VHF/UHF input in the right Twin View picture.