Sony KDL-32R420B Manual

Service à la clientèle Sony

 : http://support.sony.ca/fr

 : http://www.sony.com/tvsupport

1.877.899.SONY

1.800.222.SONY

Ne retournez pas le produit au 

magasin

Congratulations! Your new BRAVIA® TV opens the door to the “Stunning HD Experience”. 

This guide will explain how to get the most from your new High Definition TV.
Please take these steps before you power up your BRAVIA:

 ■

Register online at:  http://productregistration.sony.com (from U.S.A.) 

http://www.sony.ca/registration (from Canada)

 ■

Make sure you’ve removed all accessory contents from packaging.

 ■

Install 2 AAA batteries (supplied separately) in your remote control.

 ■

Determine whether you will mount your TV on a wall or place it on the Table-Top Stand.

 ■

Give your TV 2 

3

/

8

 inches (6 cm) of space behind it to properly ventilate.

 ■

The quality of the image you see on your BRAVIA can only be as high as the quality of the 

signal it is receiving.

 ■

Contact your cable, satellite or HD Service provider to upgrade your service to HD. 

Receive over-the-air HD broadcasts with an HD-quality antenna (www.antennaweb.org) 

and discover the wealth of entertainment now available on super-high-resolution 

Blu-ray Disc™.

 ■

To learn more about HDTV, visit:  U.S.A.: http://www.sony.com/HDTV 

Your BRAVIA TV must be properly connected to components such as sound system and 

cable or satellite box.

 ■

Turn off and unplug all components before making connections.

 ■

Do not turn on the TV until connection setup is completed.

 ■

See reverse side of this poster for sample connection diagrams.

Audio/V

ideo P

er

for

manc

e

HDMI/MHL cable carries 
both video and audio 
signals.

*

1

*

1

  

For supported PC formats refer to the operating instruction manual.

Initial Setup instructions are displayed on the screen when your BRAVIA is powered on 

for the first time.

Select the language for the OSD (on screen display).

Select the type of use.

Connect either cable or antenna to your TV. You can 

connect both using an A-B RF switch (not supplied).

Note



  If you are not using the CABLE/ANTENNA connection to TV (for 

example, if using a cable or satellite box), you can cancel the Auto 

Program by selecting Cancel.

Channels of the signal source (cable or antenna) 

connected in step 3 are automatically scanned and 

detected.

Set the current date and time.

If you did not follow the Initial Setup screen the first time 

you turned on your TV, refer to your Operating Instructions 

Manual.

To change the signal source setting (cable to antenna or vice 

versa), press HOME and select Settings, Channel, Signal 

Type to select signal source type, and then perform Auto 

Program.

When the Initial Setup is completed, consider carrying out these items:

For details, refer to your BRAVIA operating instructions manual.

Whether you are watching cable, satellite or broadcast TV; playing a VCR, DVD or 

Blu-ray Disc; or connecting to your PC, you need to choose the correct input using your 

remote control:

 ■

Press the INPUT button repeatedly until your selection is highlighted on-screen.

High Definition and Standard Definition signals are transmitted with different aspect 

ratios (the width-to-height ratio of the image).  

The 16:9 aspect ratio (common to most HD signals) looks perfect on your BRAVIA.

The boxy 4:3 aspect ratio (common to most SD signals) must be adjusted to fill the 

screen.  

 ■

Press the WIDE button on your remote control to display the Wide Mode setting of 

your preference.

You can choose optimum sound and picture settings to match the content you are 

displaying on your TV:

 ■

Press the remote control’s HOME button, select Settings, then select the Picture and 

Sound settings to adjust the picture and sound quality of your content.

Refer to your operating instructions manual for more information on adjusting or 

customizing your settings.

yellow 
plug to 
VIDEO IN

yellow 
plug to 
VIDEO IN

HDMI

Composite

Audio (L/R)

Component

Mini-Pin-to-Audio (L/R)

MHL

Coaxial

Digital Optical Audio

 ■

Your TV is equipped with multiple HDMI inputs; connect your incoming signal 

source (HD Cable Box, HD Satellite Box, or DVD) with HDMI/MHL or 

component video for the best possible picture quality.

 ■

Press PC’s FUNCTION Key + Select Output to transmit to TV.

 ■

Refer to your BRAVIA® operating instructions manual for more information.

*

1 

 Signifies a BRAVIA Sync capable device.

*

2 

 The optical connection is only needed for A/V receivers that do not support ARC 

(Audio Return Channel).

4-528-767-11(1)

Television

Télévision

Quick Setup Guide
Guide d’installation 

rapide

For Your Convenience

Be sure to register your TV.
United States

http://productregistration.sony.com

http://www.sony.ca/registration

Sony Customer Support

: http://www.sony.com/tvsupport

: http://www.sony.ca/support

1.800.222.SONY

1.877.899.SONY

Please Do Not Return 

the Product to the Store

© 2014 Sony Corporation 

Printed in Mexico