Sony KDL-46V3000 Manual
5
(GB)
Be sure to tighten the screws
securely in the designated position.
securely in the designated position.
If you fail to do so, the TV may fall and cause bodily injury
to someone or damage to the TV.
to someone or damage to the TV.
Be careful not to subject the TV to
shock during installation.
shock during installation.
If the TV is exposed to shock, it may fall or break apart. This
may cause injury.
may cause injury.
Be sure to install the TV on a wall
that is both perpendicular and flat.
that is both perpendicular and flat.
If you fail to do so, the TV may fall and cause injury.
After proper installation of the TV,
secure the cables properly.
secure the cables properly.
If people or objects get tangled with cables, this may result in
injury or damage to the TV.
injury or damage to the TV.
Do not allow the AC power cord or
the connecting cable to be pinched.
the connecting cable to be pinched.
If the AC power cord or the connecting
cable is pinched between the unit and the
wall or is bent or twisted by force, the
internal conductors may become exposed
and cause a short circuit or an electrical
break. This may cause a fire or an electric
shock.
cable is pinched between the unit and the
wall or is bent or twisted by force, the
internal conductors may become exposed
and cause a short circuit or an electrical
break. This may cause a fire or an electric
shock.
Be careful not to hurt your hands or
fingers during the installation.
fingers during the installation.
Be careful not to hurt your hands or fingers when installing
the Wall-Mount Bracket or the TV.
the Wall-Mount Bracket or the TV.
The screws needed to secure the
Wall-Mount Bracket to the wall are
not supplied.
Wall-Mount Bracket to the wall are
not supplied.
Use the appropriate screws for the wall material and structure
when mounting the Wall-Mount Bracket.
when mounting the Wall-Mount Bracket.
Before installation
If you intend to install a TV that is not specified on
page 2, be sure to refer to its operating instructions, or the
supplied leaflet.
page 2, be sure to refer to its operating instructions, or the
supplied leaflet.
Step 1:
Checking the parts
required for the
installation
Checking the parts
required for the
installation
1
Prepare four or more 8 mm (
11
/
32
inches) diameter or equivalent
screws (not supplied) and a
screwdriver. Select screws
suitable for the material of the
wall.
screws (not supplied) and a
screwdriver. Select screws
suitable for the material of the
wall.
2
Unpack the carton and check to
see that all the following items
are included.
see that all the following items
are included.
Base Bracket (2)
Mounting Hook (2)
Screw (+BVST4 × 12) (6)
Screw (+PSW6 × 16) (4)
Hexagon wrench (1)