Sony KDL75W850C Manual
5
(GB)
When using an electric screwdriver, set the torque
setting to approximately 2 N·m {20 kgf·cm}.
Do not lift the Mounting Hook before the screws
(two screws each for left/right) are secured. This
may distort the Mounting Hook or the TV cabinet.
setting to approximately 2 N·m {20 kgf·cm}.
Do not lift the Mounting Hook before the screws
(two screws each for left/right) are secured. This
may distort the Mounting Hook or the TV cabinet.
3
Referring to the Screw and Hook
locations diagram/table on
page 9, determine the screw
positions, and secure the
Mounting Hook to the rear of the
TV.
locations diagram/table on
page 9, determine the screw
positions, and secure the
Mounting Hook to the rear of the
TV.
Secure the Mounting Hook to the rear of the
TV temporarily, using the four screws (+PSW6
× 25).
× 25).
Be sure that both screws are securely
tightened with equal torque strength to the
rear of the TV.
rear of the TV.
Screw
(+PSW6 × 25)
(not supplied)
(+PSW6 × 25)
(not supplied)
Mounting
Hook
Hook
Five spacers
(not supplied)
(not supplied)
4
Make sure that the screw
firmly secures the arm base of
the Mounting Hook (both left
and right).
the Mounting Hook (both left
and right).
Notes
• When installing in portrait orientation, be sure to
keep the Mounting Hook angle to 0 degrees. Do
not use another angles.
not use another angles.
• Make sure that the two arm bases are screwed in
securely.