Sony SMP-N100 Manual
25
A
d
d
iti
o
n
a
l I
n
fo
rm
a
tio
n
The desired wireless router is not
detected even if “Scan” is performed.
detected even if “Scan” is performed.
, Press RETURN to return to the previous
screen, and try “Scan” again. If the desired
wireless router is still not detected, press
RETURN to select “Manual registration.”
wireless router is still not detected, press
RETURN to select “Manual registration.”
The message “A new software version has
been found on the network. Perform
update under "Network Update."” appears
on the screen when turning the player on.
been found on the network. Perform
update under "Network Update."” appears
on the screen when turning the player on.
, See “Network Update” (page 18) to update
the player to a newer software version.
The “Control for HDMI” function does not
work (BRAVIA Sync).
work (BRAVIA Sync).
, Check that “Control for HDMI” is set to
“On” (page 21).
, If you change the HDMI connection, turn
the player off and on again.
, If power failure occurs, set “Control for
HDMI” to “Off,” then set “Control for
HDMI” to “On” (page 21).
HDMI” to “On” (page 21).
, Check the following and refer to the
instruction manual supplied with the
component.
– the connected component is compatible
component.
– the connected component is compatible
with the “Control for HDMI” function.
– the connected component’s setting for
the “Control for HDMI” function is
correct.
correct.
, When you connect the player to a TV
through an AV amplifier (receiver),
– if the AV amplifier (receiver) is not
– if the AV amplifier (receiver) is not
compatible with the “Control for HDMI”
function, you may be unable to control
the TV from the player.
function, you may be unable to control
the TV from the player.
– if you change the HDMI connection,
disconnect and reconnect the AC power
cord, or a power failure occurs, try the
following:
cord, or a power failure occurs, try the
following:
1
Switch the input selector of
the AV amplifier (receiver) so that the
picture from the player appears on the
TV screen.
picture from the player appears on the
TV screen.
2
Set “Control for HDMI” to
“Off,” then set “Control for HDMI” to
“On” (page 21). Refer to the instruction
manual supplied with the AV amplifier
(receiver).
“On” (page 21). Refer to the instruction
manual supplied with the AV amplifier
(receiver).
Playback does not start from the
beginning of content.
beginning of content.
, Press OPTIONS, and select “Play from
beginning.”
Playback does not start from the resume
point where you last stopped playing.
point where you last stopped playing.
, The resume point may be cleared from
memory when
– you disconnect the USB device.
– you play other content.
– you turn off the player.
– you disconnect the USB device.
– you play other content.
– you turn off the player.
The player does not respond to any button.
, Hold down [/1 on the player for more than
10 seconds until the indicators on the front
panel turn off.
If the player still does not respond to any
button, disconnect then reconnect the AC
power cord.
panel turn off.
If the player still does not respond to any
button, disconnect then reconnect the AC
power cord.
BRAVIA Sync (“Control for
HDMI”)
HDMI”)
Others