Sony GPS-CS3KA Manual
6
Displaying images where they were taken
and the route you traveled on a map
and the route you traveled on a map
Step
1
Recording the traveled route
,
.
1
Insert an LR6/HR6 (size AA) battery (sold separately)
into the GPS unit, and turn it on.
Make sure that the triangulating symbol (
into the GPS unit, and turn it on.
Make sure that the triangulating symbol (
to
)
appears on the LCD screen.
2
When you use the GPS unit for the first time, the
[Time Zone] screen appears. Select the time
difference using V/v based on GMT, then press
ENTER.
[Time Zone] screen appears. Select the time
difference using V/v based on GMT, then press
ENTER.
See page 17 on the GMT time difference for each
country/region.
country/region.
3
Set the correct time on your camera.
Refer to the operating instructions of the camera.
4
Carry the GPS unit and the camera together.
Step
2
Applying the recording positioning
information to images
information to images
,
.
1
Insert the “Memory Stick Duo” media or the SD
memory card that contains the recorded images into
the GPS unit.
memory card that contains the recorded images into
the GPS unit.
2
Press MENU, then select [Matching] t [Start].
When the GPS unit has applied the positioning
information to the images, [Complete] appears.
information to the images, [Complete] appears.
3
Install the supplied software (GPS Image Tracker,
PMB, and PMB Launcher) on your computer.
PMB, and PMB Launcher) on your computer.
• You may apply positioning information to images using
the supplied GPS Image Tracker (p. 26).
• If you are using media other than “Memory Stick Duo”
media or SD memory cards, see page 26.
• When you want to adjust or change the location of the
images on a map, refer to the GPS Image Tracker Help.