Sony BDV-IT1000ES Manual

Sony BDV Series (US/FR) 4-120-032-11(1)

4-120-032-11(1)

English

To stabilize S-AIR reception

Read the following when S-AIR reception is poor or unstable.

To use S-AIR products (S-AIR main unit and sub unit)

Before using S-AIR products, have the following ready.

Confirm the wireless adapters are inserted

correctly.

Insert the wireless adapters firmly to the depth

into the slots of the S-AIR main unit and sub unit

respectively.

Confirm that the S-AIR IDs of the S-AIR main unit

and sub unit are the same.

The default setting of the S-AIR IDs of the S-AIR

main unit and sub unit is “A.”

Depending on the S-AIR product, you can set the

S-AIR ID by the switch or the setup menu.

For details, refer to the operating instructions of

each S-AIR product.

About environments where S-AIR products (S-AIR main unit and sub

unit) are used

S-AIR products use a radio frequency of 2.4 GHz. Certain electronic equipment or other factors may

cause lost connection or instability in S-AIR reception.

Electronic equipment influence

The following may cause interference or cross talk.

Cellular phones, cordless phones

Wireless LAN, personal computers

Game machines using radio signals

Microwave ovens

Other factors

The following may cause poor reception.

Materials or structures, such as walls and floors

The location where an S-AIR product is placed

When using S-AIR products, place them as far as possible from the above electronic equipment, or

place where S-AIR reception is stable.

•

–

•

–

When S-AIR reception is poor

Check the following.

Keep cords that are connected to the S-AIR product (AC power cord (mains lead), speaker cords, or

other cords) away from the wireless adapter and slot.

Keep as much space as possible around S-AIR products.
Avoid placing S-AIR products on top of, or directly below, other electronic equipment.
Avoid placing S-AIR products in a closed rack, metal rack, or under a table.

Adjust the location (height, orientation, and place in the room) of S-AIR products until reception is

the most stable.

Place so that the wireless adapters of the S-AIR main unit and sub unit are closer.

Place so that S-AIR products are separated from other wireless devices.

Place so that S-AIR products are separated from metal doors or tables.

If you cannot improve S-AIR reception, change the [S-AIR RF Change] / “RF CHANGE” setting. For

details, refer to the operating instructions of each S-AIR product.

(1)

Insert firmly

S-AIR ID setup menu

S-AIR ID switch

ID:

A
A
B
C

S-AIR ID