Eicon Diva Analog-2 306-302 Data Sheet
Product codes
306-302
2
Based on the latest industry standards, the Diva Analog-2P, Analog-4P, and Analog-8P boards work in any PCI and PCI-X-based
server with low power consumption and excellent heat dissipation. Equipped with a powerful onboard CPU and Digital Signal
Processors (DSPs), these boards can perform even the most demanding media processing functions, including V.90 modem,
high-speed V.34 fax, echo cancellation, and Voice over Internet Protocol (VoIP) processing.
server with low power consumption and excellent heat dissipation. Equipped with a powerful onboard CPU and Digital Signal
Processors (DSPs), these boards can perform even the most demanding media processing functions, including V.90 modem,
high-speed V.34 fax, echo cancellation, and Voice over Internet Protocol (VoIP) processing.
The Analog-2P, Analog-4P, and Analog-8P boards support the same set of programming interfaces as other Dialogic
®
Diva
®
boards: CAPI, TAPI, the Dialogic
®
Diva
®
API, and SIP. Because of this consistent support, any application written for another
Diva
®
board will either work without modifications or is easily portable to systems using the Diva analog boards.
Datasheet
Dialogic
®
Diva
®
Media Boards
Technical Specifications
Quick Reference
Voice resources
2, 4, or 8
Fax resources
2, 4, or 8
Conferencing resources
2, 4, or 8
Maximum boards/system
8
CSP
Yes
Form factor
2-port: low-profile PCI; 4- or 8-port: full-size PCI
Resource bus
PCI rev 2.2 up to 66 MHz
Connection
2, 4, or 8 RJ-11/14
Network interface
Analog
Signaling
Loopstart
Operating system
Windows
®
Volts
3.3 V, 5 V
Required accessories
None
Hardware
•
32-bit RISC CPU, 100 MHz, 131 MIPS
•
16 MB onboard SDRAM Memory
•
Telephony interface:
— 2 x RJ-10 connectors (Diva Analog-2P), RJ-10 to RJ-11 cables supplied
— 4 x RJ-10 connectors (Diva Analog-4P), RJ-10 to RJ-11 cables supplied
— 4 x RJ-45 connectors (Diva Analog-8P), RJ-45 to RJ-10 adapters and RJ-10 to RJ-11 cables supplied
— POTS trunk interface
— Loopstart signaling
— 2 x RJ-10 connectors (Diva Analog-2P), RJ-10 to RJ-11 cables supplied
— 4 x RJ-10 connectors (Diva Analog-4P), RJ-10 to RJ-11 cables supplied
— 4 x RJ-45 connectors (Diva Analog-8P), RJ-45 to RJ-10 adapters and RJ-10 to RJ-11 cables supplied
— POTS trunk interface
— Loopstart signaling
•
Physical dimensions:
—167.52 mm x 64.41 mm (PCB of Diva Analog-2P)
—181.36 mm x 80.06 mm (Diva Analog-2P with Low Profile bracket)
—181.36 mm x 120.88 mm (Diva Analog-2P with standard bracket)
— 312.00 mm x 106.68 mm (PCB of Diva Analog-4P and 8P)
— 352.17 mm x 126.37 mm (Diva Analog-4P and 8P including bracket and retainer)
—167.52 mm x 64.41 mm (PCB of Diva Analog-2P)
—181.36 mm x 80.06 mm (Diva Analog-2P with Low Profile bracket)
—181.36 mm x 120.88 mm (Diva Analog-2P with standard bracket)
— 312.00 mm x 106.68 mm (PCB of Diva Analog-4P and 8P)
— 352.17 mm x 126.37 mm (Diva Analog-4P and 8P including bracket and retainer)
•
2/4/8 x 32.76 MHz, 65 MIPS DSP
•
Host interface:
— Low-profile (2P) or full-size PCI form factor (4P and 8P)
— 3.3/5 V universal signaling
— PCI plug and play
— PCI 2.2 up to 66 MHz
— Scaleable to 8 adapters per system
— Low-profile (2P) or full-size PCI form factor (4P and 8P)
— 3.3/5 V universal signaling
— PCI plug and play
— PCI 2.2 up to 66 MHz
— Scaleable to 8 adapters per system
Power Consumption and Environmental
•
Power consumption: 340 (2P), 450 (4P) and 500 mA (8P) @ +5 V typical
•
Operating temperature: 10°C to 50°C
•
Storage temperature: 0°C to 70°C
•
Maximum tolerance in voltage fluctuation: According to the respective PCI or PCI Express specification