Sony DIR-TC1 Manual
6
GB
About the surround amplifier
After connecting, you can attach the cover to the
surround amplifier for organizing and storing
excess speaker cords.
surround amplifier for organizing and storing
excess speaker cords.
Attaching the cover
1
Attach the speaker cord cover by
sliding it down along the grooves at the
edges of the surround amplifier.
sliding it down along the grooves at the
edges of the surround amplifier.
Push the speaker cord cover down until you
hear a click. Turn the surround amplifier
upside down, then store the cords in the
speaker cord cover.
hear a click. Turn the surround amplifier
upside down, then store the cords in the
speaker cord cover.
2
Insert the tabs of the speaker cord
holder in the slots of the speaker cord
cover, and press it into place.
holder in the slots of the speaker cord
cover, and press it into place.
3
Secure the speaker cord holder with
the supplied screw.
the supplied screw.
Note
• Do not use the speaker cord cover and holder without
the supplied screw.
• Before detaching the speaker cord cover, first remove
the screw, then the speaker cord holder. Forcing the
speaker cord cover off with the screw in place may
cause damage.
speaker cord cover off with the screw in place may
cause damage.
• Gently pull apart the side of the speaker cord cover
when detaching.
Speaker cord cover
Surround amplifier
Grooves
Speaker cord holder
Surround amplifier
Tabs
Screw