Sony DMX-WL1 Manual

Page of 2
DMX-WL1   4-128-554-02(1)  
DMX-WL1
© 2008 Sony Corporation   Printed in Japan
Supplement
Notice: 
You may experience picture noise or diminished sound quality when this system is used with other 5GHz 
products nearby.
5.8GHz Cordless Phones
Some 5.8GHz Cordless Phones near the receiver unit could cause picture noise or diminish the sound quality.
Solutions/Remedies:
1. Press the 
CONNECT button to change to a different wireless channel.
2.  Move the cordless base station and handset 10 feet (3m) or more away from the receiver unit.
5.8GHz Cordless Phone
Transmitter Unit
TV with Receiver Unit
10 feet (3 m) 
or more
5.2GHz Wireless LAN
A Wireless LAN router or client PC (IEEE802.11a/n) could cause picture noise, diminish the sound quality, or affect 
Wireless LAN performance.
Solutions/Remedies:
1. Press the 
CONNECT button to change to a different wireless channel
.
2.  If your Wireless LAN router uses 5.2GHz (channels 36-48) turn off the Wireless LAN router’s wide mode.  See your 
router’s instruction manual for details.
3.  Change the channel of your Wireless LAN router to 2.4GHz (channels 1-11) or 5.8GHz (channels 149-165). See your 
router’s instruction manual for details.
PC
Transmitter Unit
TV with Receiver Unit
5.2GHz Wireless LAN Router
Multiple Wireless Link Units within the home
Multiple BRAVIA Wireless Link systems in the home could cause a picture noise or diminish the sound quality.
Solutions/Remedies:
1. Press the 
CONNECT button to change to a different wireless channel.  
2.  Try moving the BRAVIA Wireless Link Systems further away from each other.
3.  Try moving the transmitter and receiver of each system closer together.
Transmitter Unit
Transmitter Unit
TV with Receiver Unit
TV with Receiver Unit
4-128-554-02(1)
BRAVIA Wireless Link Channel Overview
This system has four 5.2GHz band channels.
5.2GHz Wireless LAN IEEE802.11a/n may also use the same channels.
5.2GHz Band
CH36
CH40
CH44
CH48
CONNECT
The default setting will select the wireless channel automatically. You can manually select another wireless channel by 
pressing the 
CONNECT button. When you press the CONNECT button, the wireless channel changes to the next channel 
as shown below. The INPUT SELECT LED 1-5 will blink according to the channel selected.
CH36
CH40
CH44
CH48
LED 4
LED 3
LED 2
LED 1
Automatic
LED 5
POWER
LINK LEVEL
INPUT SELECT
HDMI
COMPONENT
1
2
3
4
5
INPUT SELECT LED 1-5
CONNECT button
For Best Reception Performance:
Make sure that the transmitter and receiver units are within 65 feet (20m) of each other.
Make sure there are no walls between the transmitter and receiver units.
Make sure there are no mirrors or large metal objects between the transmitter and receiver units.
Make sure that the front of the transmitter points in the direction of the receiver unit.
Try installing the units in a vertical or horizontal orientation to improve the reception performance and link level.
Try pressing the 
CONNECT button to manually select a wireless channel if you experience picture noise or diminished 
sound quality.
 Important Safety Instructions
 Do not operate this product near medical equipment (pacemaker, etc.).