Sony CDX-GT65UIW Manual
15
Registering a USB device using
“SensMe™ Setup”
“SensMe™ Setup”
USB device registration is required to enable the
SensMe™ function on the unit.
SensMe™ function on the unit.
If registration is not performed along with the
installation procedure, follow the steps below.
installation procedure, follow the steps below.
1
Start “SensMe™ Setup” on your
computer.
computer.
2
Connect a USB device to your
computer.
computer.
3
Complete registration following the
on-screen instructions.
on-screen instructions.
Tip
If you connect a registered USB device containing
analyzed tracks, the USB device can be unregistered
again.
If you connect a registered USB device containing
analyzed tracks, the USB device can be unregistered
again.
Transferring tracks to the USB
device using “Content Transfer”
device using “Content Transfer”
To enable the SensMe™ function on this unit,
tracks need to be analyzed and transferred to the
registered USB device, using “Content Transfer.”
tracks need to be analyzed and transferred to the
registered USB device, using “Content Transfer.”
1
Connect the registered USB device to
your computer.
For USB devices, connect with the MSC
mode.
“Content Transfer” starts automatically.
If a message appears, follow the on-screen
instructions to proceed.
your computer.
For USB devices, connect with the MSC
mode.
“Content Transfer” starts automatically.
If a message appears, follow the on-screen
instructions to proceed.
2
Drag and drop tracks from Windows
Explorer or iTunes, etc., to “Content
Transfer.”
The analysis and transfer of tracks start.
Explorer or iTunes, etc., to “Content
Transfer.”
The analysis and transfer of tracks start.
For details on operations, see the Help of
“Content Transfer.”
“Content Transfer.”
Note
The track analysis by 12 TONE ANALYSIS™ may take
time, depending on the computer environment.
The track analysis by 12 TONE ANALYSIS™ may take
time, depending on the computer environment.
Playing tracks in the channel
— SensMe™ channels
— SensMe™ channels
“SensMe™ channels” automatically group tracks
into channels by their tunes. You can select and
play a channel that fits your mood, activity, etc.
into channels by their tunes. You can select and
play a channel that fits your mood, activity, etc.
1
Connect a USB device set up for the
SensMe™ function.
SensMe™ function.
2
Press (SOURCE/OFF) repeatedly until
“SENSME CH” appears.
The channel list appears, and the most
melodic or rhythmical sections* of tracks are
shuffle played.
“SENSME CH” appears.
The channel list appears, and the most
melodic or rhythmical sections* of tracks are
shuffle played.
* May not be detected correctly.
3
Selecting a track from the channel list
using the control dial.
using the control dial.
• Change the channel
Push (1)/(2) (ALBUM V/v) to select the
desired channel.
desired channel.
• Change the track
Push (SEEK) +/– until the desired track
appears, then press the control dial.
Playback starts from the beginning of the
current track.
appears, then press the control dial.
Playback starts from the beginning of the
current track.
If you do not operate anything for 10 seconds,
the display returns to normal play mode.
the display returns to normal play mode.
Notes
• Depending on the track, it may not be detected
• Depending on the track, it may not be detected
correctly or may be grouped in a channel not suited
to the track’s mood.
to the track’s mood.
• If the connected USB device contains many tracks, it
may take time for “SensMe™ channels” to start, due
to data reading.
to data reading.
Tip
Tracks are played in random order. The order will vary
at each channel selection.
Tracks are played in random order. The order will vary
at each channel selection.
continue to next page
t