Sony cdx-m10 Manual

Page of 116
15
Playback order of MP3/WMA files
About MP3 files
• MP3, which stands for MPEG-1 Audio Layer-3, is 
a music file compression format standard. It 
compresses audio CD data to approximately 1/10 
of its original size.
• ID3 tag versions 1.0, 1.1, 2.2, 2.3 and 2.4 apply to 
MP3 only. ID3 tag is 15/30 characters (1.0 and 
1.1), or 63/126 characters (2.2, 2.3 and 2.4).
• When naming an MP3 file, be sure to add the file 
extension “.mp3” to the file name.
• During playback or fast-forward/reverse of a VBR 
(variable bit rate) MP3 file, elapsed playing time 
may not display accurately.
Note
If you play a high-bit-rate MP3, such as 320 kbps, 
sound may be intermittent.
About WMA files
• WMA, which stands for Windows Media Audio, 
is a music file compression format standard. It 
compresses audio CD data to approximately 1/22* 
of its original size.
• WMA tag is 63 characters.
• When naming a WMA file, be sure to add the file 
extension “.wma” to the file name.
• During playback or fast-forward/reverse of a VBR 
(variable bit rate) WMA file, elapsed playing time 
may not display accurately.
*
only for 64 kbps
Note
Playback of the following WMA files is not supported.
– lossless compression
– copyright-protected
If you have any questions or problems concerning 
your unit that are not covered in this manual, consult 
your nearest Sony dealer.
Maintenance
Fuse replacement
When replacing the fuse, be 
sure to use one matching the 
amperage rating stated on the 
original fuse. If the fuse blows, 
check the power connection and 
replace the fuse. If the fuse 
blows again after replacement, 
there may be an internal 
malfunction. In such a case, 
consult your nearest Sony 
dealer.
Cleaning the connectors
The unit may not function properly if the connectors 
between the unit and the front panel are not clean. In 
order to prevent this, detach the front panel (page 4) 
and clean the connectors with a cotton swab. Do not 
apply too much force. Otherwise, the connectors 
may be damaged.
Notes
• For safety, turn off the ignition before cleaning the 
connectors, and remove the key from the ignition 
switch.
• Never touch the connectors directly with your fingers 
or with any metal device.
Removing the unit
1
Remove the protection collar.
1
Detach the front panel (page 4).
2
Engage the release keys together with the 
protection collar.
Folder 
(album)
MP3/WMA file 
(track)
MP3/WMA
continue to next page 
t
Fuse (10 A)
Main unit
Back of the front 
panel
Orient the release 
keys as shown.