Sony CDX-S2000 Manual
12
Other Functions
Adjusting the balance and
fader
fader
You can adjust the balance and fader.
1
Press (SEL) repeatedly until “BAL” or
“FAD” appears.
Each time you press (SEL), the item changes
as follows:
“FAD” appears.
Each time you press (SEL), the item changes
as follows:
LOW*
t
MID*
t
HI*
t
BAL (left-right)
t FAD (front-rear)
* When EQ3 is activated (page 13).
2
Press the volume +/– button to adjust
the selected item.
the selected item.
Note
Adjust within 3 seconds after selecting the item.
Adjust within 3 seconds after selecting the item.
Quickly attenuating the
sound
sound
Press (ATT).
“ATT” appears in the display.
“ATT” appears in the display.
To restore the previous volume level, press
(ATT) again.
(ATT) again.
Changing the sound and
display settings
display settings
The following items can be set:
• DEMO* — to turn the demonstration display
• DEMO* — to turn the demonstration display
on or off.
– Select “ON” to activate the demonstration
– Select “ON” to activate the demonstration
display (The demonstration starts about 10
seconds after the unit is turned off).
seconds after the unit is turned off).
– Select “OFF” to deactivate the demonstration
display.
• BEEP — to turn the beeps on or off.
Selecting the desired item
Press (SEL) and the desired preset
number button simultaneously.
number button simultaneously.
(SEL) + (4): DEMO*
(SEL) + (6): BEEP
* When the unit is turned off.
To cancel the item, press (SEL) and the preset
number button simultaneously again.
number button simultaneously again.