Manualsbrain.com
  1. Manuals
  2. Brands
  3. Sony
  4. DCR-DVD403
  5. User Guide

Sony DCR-DVD403 User Guide

Download
Page of 120
50
DCR-DVD92/DVD103/DVD203/DVD403/DVD602/DVD653/DVD703/DVD803 
2-587-622-11 (1)
Recording additional scenes after finalizing
You can record additional material on the 
finalized DVD-RWs (VIDEO mode)/
DVD+RWs by following the steps below if 
there is space to record on the disc.
When using the finalized DVD-RW (VR 
mode) disc, you can record additional 
material on the disc without any additional 
steps.
•  Use an AC Adaptor as power source to prevent 
your camcorder from running out of power 
during operation.
•  Do not apply shock or vibration to your 
camcorder, and do not disconnect the AC 
adaptor during operation.
•  A DVD menu and a Photomovie created during 
finalizing are deleted.
•  When you use a double-sided disc, following 
procedures are required on each side.
When using a DVD-RW (VIDEO 
mode) disc (Unfinalizing)
1
  Connect the AC Adaptor to the 
DC IN jack on your camcorder, 
then connect the power cord to 
the wall outlet.
2
  Turn on the power by sliding the 
POWER switch down.
3
  Insert the finalized disc into your 
camcorder.
4
  Touch 
 
 [SETUP].
5
  Touch 
 
DISC SET 
 
[UNFINALIZE]. 
6
  Touch [YES] 
 [YES], then touch 
 when [Completed.] appears.
When using a DVD+RW
If you have created a Photomovie or a
DVD menu in finalizing (p.44), the 
following steps are required.
1
  Connect the AC Adaptor to the 
DC IN jack on your camcorder, 
then connect the power cord to 
the wall outlet.
2
  Slide the POWER switch down to 
light up the 
 (Movie) or   (Still) 
lamp.
3
  Insert the finalized disc into your 
camcorder.
A confirmation dialog asking if you 
record additional scenes appears.
4
  Touch [YES] 
 [YES]. 
[Completed.] appears, then the
screen returns to the recording screen.