Sony BM-850T2 Manual
BM-850D/T 3-757-398-32 U E
17
Operations
Telephone Recording
To record telephone
conversation, connect the
optional TL-4 telephone
recording adaptor* to the
TELEPHONE PICKUP jack.
For further details, refer to the
instruction manual of the
telephone recording adaptor.
conversation, connect the
optional TL-4 telephone
recording adaptor* to the
TELEPHONE PICKUP jack.
For further details, refer to the
instruction manual of the
telephone recording adaptor.
* The TL-4 cannot be used on
some telephones.
At the beginning of
telephone recording
LTR signal is automatically
recorded for about 3 seconds and
the telephone recording begins at
the same time.
While the LTR signal is being
recorded (for about 3 seconds), the
unit cannot be stopped even
though the STOP button is
pressed.
telephone recording
LTR signal is automatically
recorded for about 3 seconds and
the telephone recording begins at
the same time.
While the LTR signal is being
recorded (for about 3 seconds), the
unit cannot be stopped even
though the STOP button is
pressed.
During telephone recording
Only the LTR, SEC and STOP
buttons are operative.
Only the LTR, SEC and STOP
buttons are operative.
1
TL-4 (not
supplied)
supplied)
BM-850
Rear
to TELEPHONE
PICKUP
PICKUP
Telephone
3
4
5
2
p STOP
REC/ERASE
Note
If the TEL REC button is pressed
when the telephone recording
adaptor, etc. is not connected, the
beep tone will be heard and the
recording will not start.
If the TEL REC button is pressed
when the telephone recording
adaptor, etc. is not connected, the
beep tone will be heard and the
recording will not start.
1
Connect the TL-4 (not supplied) to the unit.
2
Set POWER to ON.
3
Insert a cassette. (See page 7.)
4
Set TAPE SPEED to the desired tape speed.
5
Keep TEL REC pressed for more than a second.
Telephone recording begins. REC/ERASE lamp blinks and (
appears on the display window.
Telephone recording begins. REC/ERASE lamp blinks and (
appears on the display window.
To stop the tape
Press p STOP.