Sony MEX-BT38UW Manual
25
Operating an audio device with this
unit
unit
You can perform the following operations on this
unit if the audio device supports AVRCP (Audio
Video Remote Control Profile) of Bluetooth
technology. (The operation differs depending on
the audio device.)
unit if the audio device supports AVRCP (Audio
Video Remote Control Profile) of Bluetooth
technology. (The operation differs depending on
the audio device.)
* Depending on the device, it may be necessary to
press twice.
Operations other than the above should be
performed on the audio device.
performed on the audio device.
Notes
• During audio device playback, information such as
• During audio device playback, information such as
track number/time, playback status, etc., of a
connected audio device is not displayed on this unit.
connected audio device is not displayed on this unit.
• Even if the source is changed on this unit, playback
of the audio device does not stop.
Tip
You can connect a cellular phone that supports A2DP
(Advanced Audio Distribution Profile) as an audio
device and listen to music.
You can connect a cellular phone that supports A2DP
(Advanced Audio Distribution Profile) as an audio
device and listen to music.
Deleting registration of all
paired devices
paired devices
1
Press and hold (SOURCE/OFF) for 1
second to turn off the power.
second to turn off the power.
2
If “
” lights, press and hold
(BT) until “
” turns off.
3
Press and hold the select button.
4
Press the select button repeatedly
until “BT INIT” appears.
until “BT INIT” appears.
5
Press (SEEK) +.
Initializing starts.
It takes 3 seconds to cancel all registration.
Do not turn off the power while “INITIAL” is
flashing.
Initializing starts.
It takes 3 seconds to cancel all registration.
Do not turn off the power while “INITIAL” is
flashing.
Other functions
Changing the sound settings
Adjusting the sound
characteristics
characteristics
1
Press the select button repeatedly
until the desired item appears.
until the desired item appears.
2
Rotate the control dial to adjust the
selected item.
selected item.
3
Press
(BACK).
The setting is complete and the display
returns to normal reception/play mode.
returns to normal reception/play mode.
The following items can be set (follow the page
reference for details):
reference for details):
To
Press
Play
(6) (PAUSE)* on this unit.
Pause
(6) (PAUSE)* on this unit.
Skip tracks
SEEK –/+ (
.
/
>
) [once for
each track]
EQ3
Selects an equalizer curve from 7 music types
(XPLOD, VOCAL, EDGE, CRUISE, SPACE,
GRAVITY, CUSTOM or OFF).
(XPLOD, VOCAL, EDGE, CRUISE, SPACE,
GRAVITY, CUSTOM or OFF).
LOW*
1
, MID*
1
, HI*
1
BAL (Balance)
Adjusts the sound balance between the left and
right speakers.
right speakers.
FAD (Fader)
Adjusts the relative level between the front and
rear speakers.
rear speakers.
SUB*
2
(Subwoofer volume)
Adjusts the subwoofer volume.
AUX*
3
(AUX level)
Adjusts the volume level for each connected
auxiliary equipment: “+18 dB” – “0 dB” – “–8
dB.”
This setting negates the need to adjust the
volume level between sources.
auxiliary equipment: “+18 dB” – “0 dB” – “–8
dB.”
This setting negates the need to adjust the
volume level between sources.
BTA*
4
(BT-Audio level)
Adjusts the volume level for each connected
Bluetooth audio device: “+18 dB” – “0 dB” –
“–8 dB.”
This setting negates the need to adjust the
volume level between sources (page 24).
Bluetooth audio device: “+18 dB” – “0 dB” –
“–8 dB.”
This setting negates the need to adjust the
volume level between sources (page 24).
*1 When EQ3 is activated.
*2 “ATT” is displayed at the lowest setting, and can be
*2 “ATT” is displayed at the lowest setting, and can be
adjusted up to 21 steps.
*3 When AUX source is activated (page 27).
*4 When Bluetooth audio source is activated
*4 When Bluetooth audio source is activated