Sony MEX-GS810BH Manual
27
GB
Pairing failed due to time out.
Depending on the connecting device, the time
Depending on the connecting device, the time
limit for pairing may be short.
Try completing the pairing within the time.
Try completing the pairing within the time.
BLUETOOTH function cannot operate.
Turn off the unit by pressing OFF for more than 2
Turn off the unit by pressing OFF for more than 2
seconds, then turn the unit on again.
No sound is output from the car speakers during
handsfree call.
If the sound is output from the cellular phone, set
handsfree call.
If the sound is output from the cellular phone, set
the cellular phone to output the sound from the
car speakers.
car speakers.
Pandora® connection is not possible.
Shut down the Pandora® application on the
Shut down the Pandora® application on the
mobile device, and then launch again.
Application name is mismatched with the actual
application in App Remote.
Launch the application again from the “App
application in App Remote.
Launch the application again from the “App
Remote” application.
While running the “App Remote” application via
BLUETOOTH, the display automatically switches
to [BT AUDIO].
The “App Remote” application or BLUETOOTH
BLUETOOTH, the display automatically switches
to [BT AUDIO].
The “App Remote” application or BLUETOOTH
function has failed.
Run the application again.
Run the application again.
Error displays/Messages
ERROR
The disc is dirty or inserted upside down.
The disc is dirty or inserted upside down.
Clean or insert the disc correctly.
A blank disc has been inserted.
The disc cannot play due to a problem.
Insert another disc.
USB device was not automatically recognized.
Connect it again.
Press to remove the disc.
HUB NO SUPRT (hubs not supported)
USB hub is not supported on this unit.
USB hub is not supported on this unit.
IPD STOP (iPod stop)
When repeat play is not set, playback of the last
When repeat play is not set, playback of the last
track in album finished.
The music application in the iPod/iPhone is
terminated.
Press PAUSE to start playback again.
The music application in the iPod/iPhone is
terminated.
Press PAUSE to start playback again.
NO DEV (no device)
[USB] is selected as source without a USB device
[USB] is selected as source without a USB device
connected. A USB device or a USB cable has been
disconnected during playback.
Be sure to connect a USB device and USB cable.
disconnected during playback.
Be sure to connect a USB device and USB cable.
NO MUSIC
The disc or USB device does not contain a music
The disc or USB device does not contain a music
file.
Insert a music CD.
Insert a music CD.
Connect a USB device with a music file in it.
OVERLOAD
USB device is overloaded.
USB device is overloaded.
Disconnect the USB device, then change the
source by pressing SRC.
The USB device has a fault, or an unsupported
device is connected.
PUSH EJT (push eject)
The disc cannot be ejected.
The disc cannot be ejected.
Press (eject).
READ
The unit is reading all track and album
The unit is reading all track and album
information on the disc.
Wait until reading is complete and playback
Wait until reading is complete and playback
starts automatically. Depending on the disc
structure, it may take more than a minute.
structure, it may take more than a minute.
USB NO SUPRT (USB not supported)
The connected USB device is not supported.
The connected USB device is not supported.
For details on the compatibility of your USB
device, visit the support site.
[
] or [
]
During reverse or fast-forward, you have reached
the beginning or the end of the disc and you
cannot go any further.
cannot go any further.
[
]
The character cannot be displayed.
For BLUETOOTH function:
BT BUSY (BLUETOOTH busy)
The phonebook and the call history of the cellular
The phonebook and the call history of the cellular
phone are not accessible from this unit.
Wait for a while, and then try again.
Wait for a while, and then try again.
ERROR
BT Initialize failed.
BT Initialize failed.
Phonebook access failed.
Phonebook content was changed while
accessing the cellular phone.
Access the phonebook in the cellular phone
Access the phonebook in the cellular phone
again.
MEM FAILURE (memory failure)
This unit failed to store the contact in the preset
This unit failed to store the contact in the preset
dial.
Make sure that the number you intend to store
Make sure that the number you intend to store
is correct (page 15).