Sony MEX-BT3000P Manual
32
– Move your car to a place where you can
enhance the cellular phone’s signal if the
reception is poor.
reception is poor.
The volume of the connected audio device is
low (high).
Volume level will differ depending on the
low (high).
Volume level will differ depending on the
audio device.
– Adjust the volume of the connected audio
– Adjust the volume of the connected audio
device or this unit.
No sound is heard from the Bluetooth audio
device.
The audio device is paused.
device.
The audio device is paused.
– Cancel pause of the audio device.
The sound skips during playback of a
Bluetooth audio device.
Reduce the distance between the unit and the
Bluetooth audio device.
Reduce the distance between the unit and the
Bluetooth audio device.
If the Bluetooth audio device is stored in a case
which interrupts the signal, remove the audio
device from the case during use.
device from the case during use.
Several Bluetooth devices or other devices
which emit radio waves are in use nearby.
– Turn off the other devices.
– Increase the distance from the other devices.
– Turn off the other devices.
– Increase the distance from the other devices.
The playback sound stops momentarily when
the connection between this unit and the
cellular phone is being made. This is not a
malfunction.
cellular phone is being made. This is not a
malfunction.
The connected Bluetooth audio device
cannot be controlled.
Check that the connected Bluetooth audio
cannot be controlled.
Check that the connected Bluetooth audio
device supports AVRCP.
Some functions do not work.
Check if the connecting device supports the
Check if the connecting device supports the
functions in question.
The name of the other party does not appear
when a call is received.
The calling phone is not set to send the phone
when a call is received.
The calling phone is not set to send the phone
number.
A call is answered unintentionally.
The connecting phone is set to answer a call
The connecting phone is set to answer a call
automatically.
“AUTO ANSWER” of this unit is set to
“ANS-1” or “ANS-2” (page 13).
Pairing failed due to time out.
Depending on the connecting device, the time
Depending on the connecting device, the time
limit for pairing may be short.
– Try completing the pairing within the time.
– Try completing the pairing within the time.
Bluetooth function cannot operate.
Turn off the unit by pressing
Turn off the unit by pressing
for more than 2 seconds, then turn the unit on
again.
again.
No sound is output from the car speakers
during handsfree call.
If the sound is output from the cellular phone,
during handsfree call.
If the sound is output from the cellular phone,
set the cellular phone to output the sound from
the car speakers.
the car speakers.
Pandora® connection is not possible.
Shut down the Pandora® application on the
Shut down the Pandora® application on the
mobile device, and then launch again.
Error displays/Messages
BT BUSY
(Bluetooth Busy)
The phonebook and the call history of the
cellular phone are not accessible from this unit.
– Wait for a while, and then try again.
– Wait for a while, and then try again.
EMPTY
The call history is empty.
The phonebook is empty.
The call history is empty.
The phonebook is empty.
ERROR
The disc is dirty or inserted upside down.
The disc is dirty or inserted upside down.
– Clean or insert the disc correctly.
A blank disc has been inserted.
The disc cannot play due to a problem.
The disc cannot play due to a problem.
– Insert another disc.
Press (eject) to remove the disc.
BT Initialize failed.
Phonebook access failed.
Phonebook content was changed while
BT Initialize failed.
Phonebook access failed.
Phonebook content was changed while
accessing the cellular phone.
– Access the phonebook in the cellular phone
– Access the phonebook in the cellular phone
again.
FAILURE
The connection of speakers/amplifiers is
The connection of speakers/amplifiers is
incorrect.
– See the installation/connections manual of
– See the installation/connections manual of
this model to check the connection.