Sony MEX-N6000BH Manual
7
GB
3
Rotate the control dial to set the hour
and minute.
and minute.
To move the digital indication, press SEEK +/–.
4
After setting the minute, press MENU.
The setup is complete and the clock starts.
To display the clock, press DSPL.
Preparing a BLUETOOTH Device
You can enjoy music, or perform handsfree calling,
by connecting a suitable BLUETOOTH device. For
details on connecting, refer to the operating
instructions supplied with the device.
Before connecting the device, turn down the
volume of this unit; otherwise, loud sound may
result.
by connecting a suitable BLUETOOTH device. For
details on connecting, refer to the operating
instructions supplied with the device.
Before connecting the device, turn down the
volume of this unit; otherwise, loud sound may
result.
When connecting a BLUETOOTH device (cellular
phone, audio device, etc.) for the first time, mutual
registration (called “pairing”) is required. Pairing
enables this unit and other devices to recognize
each other.
phone, audio device, etc.) for the first time, mutual
registration (called “pairing”) is required. Pairing
enables this unit and other devices to recognize
each other.
1
Place the BLUETOOTH device within 1 m
(3 ft) of this unit.
(3 ft) of this unit.
2
Press CALL, rotate the control dial to
select [PAIRING], then press it.
select [PAIRING], then press it.
flashes.
The unit enters pairing standby mode.
3
Perform pairing on the BLUETOOTH
device so it detects this unit.
device so it detects this unit.
4
Select [Sony Car Audio] shown in the
display of the BLUETOOTH device.
display of the BLUETOOTH device.
If [Sony Car Audio] does not appear, repeat from
step 2.
step 2.
5
If passkey* input is required on the
BLUETOOTH device, input [0000].
BLUETOOTH device, input [0000].
* Passkey may be called “Passcode,” “PIN code,”
“PIN number” or “Password,” etc., depending on
the device.
the device.
When pairing is made,
stays lit.
6
Select this unit on the BLUETOOTH device
to establish the BLUETOOTH connection.
to establish the BLUETOOTH connection.
or
lights up when the connection is
made.
Note
While connecting to a BLUETOOTH device, this unit
cannot be detected from another device. To enable
detection, enter the pairing mode and search for this
unit from another device.
While connecting to a BLUETOOTH device, this unit
cannot be detected from another device. To enable
detection, enter the pairing mode and search for this
unit from another device.
To cancel pairing
Perform step 2 to cancel the pairing mode after this
unit and the BLUETOOTH device are paired.
unit and the BLUETOOTH device are paired.
To use a paired device, connection with this unit is
required. Some paired devices will connect
automatically.
required. Some paired devices will connect
automatically.
1
Press CALL, rotate the control dial to
select [BT SIGNL], then press it.
select [BT SIGNL], then press it.
Make sure that
lights up.
2
Activate the BLUETOOTH function on the
BLUETOOTH device.
BLUETOOTH device.
3
Operate the BLUETOOTH device to
connect to this unit.
connect to this unit.
or
lights up.
Icons in the display:
Pairing and connecting with a
BLUETOOTH device
BLUETOOTH device
Connecting with a paired BLUETOOTH
device
device
Lights up when a cellular phone is
connected to the unit.
connected to the unit.
Lights up when an audio device is
connected to the unit.
connected to the unit.
Indicates the signal strength status of
connected cellular phone.
connected cellular phone.
[0000]
Input passkey