Sony XAV-64BT Manual
32
Installing the microphone (XAV-
64BT only)
64BT only)
To capture your voice during handsfree calling,
you need to install the microphone (supplied).
you need to install the microphone (supplied).
For details on how to connect the microphone,
refer to the supplied “Installation/Connections”
guide.
refer to the supplied “Installation/Connections”
guide.
Pairing
Pairing is required only the first time you connect
to a Bluetooth device (cellular phone, etc.).*
to a Bluetooth device (cellular phone, etc.).*
1
To pair this unit to a Bluetooth device, you need
to enter the same passkey*
to enter the same passkey*
2
on this unit and on
the Bluetooth device. The passkey can be either
your own selected number or the number
determined by the Bluetooth device. For details,
refer to the manual of the Bluetooth device.
your own selected number or the number
determined by the Bluetooth device. For details,
refer to the manual of the Bluetooth device.
*1 If you delete the device registration from this unit
by initializing, you need to perform pairing again.
*2 Passkey may be called “passcode,” “PIN code,”
“PIN number,” “password,” etc., depending on the
Bluetooth device.
Bluetooth device.
1
Select the Bluetooth source.
To select Bluetooth Phone, press (TOP), then
touch “BT Phone” in the top menu.
To select Bluetooth Audio, touch “Source
List,” then “BT Audio.”
To select Bluetooth Phone, press (TOP), then
touch “BT Phone” in the top menu.
To select Bluetooth Audio, touch “Source
List,” then “BT Audio.”
2
Touch “BT Menu.”
In the case of Bluetooth Audio, touch “Play
Menu,” then “BT Menu.”
The Bluetooth setting menu appears.
In the case of Bluetooth Audio, touch “Play
Menu,” then “BT Menu.”
The Bluetooth setting menu appears.
3
Touch “Pairing.”
Pairing starts.*
Pairing starts.*
* If the Bluetooth signal of this unit is off, it
activates automatically when pairing starts.
4
Operate the Bluetooth device to
search for this unit.
A device list appears on the display of the
device. This unit is displayed as “Sony
Automotive.”
search for this unit.
A device list appears on the display of the
device. This unit is displayed as “Sony
Automotive.”
5
If passkey* input is required on the
display of the device, input “0000.”
display of the device, input “0000.”
This unit and the Bluetooth device memorize
each other’s information, and when pairing is
made, this unit is ready for connection to the
device.
each other’s information, and when pairing is
made, this unit is ready for connection to the
device.
6
Operate the Bluetooth device to
connect to this unit.
“Bluetooth device connected.” appears and
connection is complete. “
connect to this unit.
“Bluetooth device connected.” appears and
connection is complete. “
” or “
” appears
when the connection is made.
Notes
• While connecting to a Bluetooth device, this unit
• While connecting to a Bluetooth device, this unit
cannot be detected from another device. To enable
detection, enter the pairing mode and search for this
unit from another device.
detection, enter the pairing mode and search for this
unit from another device.
• It may take time to pair or connect.
• Depending on the device, the confirmation display of
• Depending on the device, the confirmation display of
the connection appears before inputting the
passkey.
passkey.
• The time limit for inputting the passkey differs
depending on the device.
• This unit cannot be connected to a device that
supports only HSP (Head Set Profile).
1/2
ATT
Back
Top
BT Menu
Signal
Pairing
Auto Answer
Ringtone
EC/NC Mode
OFF
/
ON
OFF
Default
/ Cellular
Mode 1
/ Mode 2
XXXXXXX
DR-BT30Q
Sony
Automotive
XXXX
Input passkey.
“0000”