Sony XAV-64BT Manual
37
Audio streaming
Listening to a Bluetooth device via
this unit
this unit
If the other device supports A2DP (Advanced
Audio Distribution Profile), you can listen to the
playback sound via this unit.
Audio Distribution Profile), you can listen to the
playback sound via this unit.
1
Connect this unit and the Bluetooth
device (page 33).
device (page 33).
2
Reduce the volume on this unit.
3
Touch “Source List,” then “BT Audio.”
The Bluetooth Audio display appears.
The Bluetooth Audio display appears.
4
Operate the other Bluetooth device to
start playback.
start playback.
5
Adjust the volume on this unit.
Operating a Bluetooth device with
this unit
this unit
If the other device supports AVRCP (Audio
Video Remote Control Profile), you can control
playback via this unit.
Video Remote Control Profile), you can control
playback via this unit.
Notes
• The available operation differs depending on the
• The available operation differs depending on the
Bluetooth device. Perform unavailable operations on
the Bluetooth device.
the Bluetooth device.
• Depending on the Bluetooth device, it may be
necessary to touch u twice to start/pause the
playback.
playback.
• During audio streaming, some indications such as
track name, etc., may not appear on this unit.
Bluetooth settings
The Bluetooth settings can be configured in “BT
Menu.”
Menu.”
1
Select the Bluetooth source.
To select Bluetooth Phone, press (TOP), then
touch “BT Phone” in the top menu.
To select Bluetooth Audio, touch “Source
List,” then “BT Audio.”
To select Bluetooth Phone, press (TOP), then
touch “BT Phone” in the top menu.
To select Bluetooth Audio, touch “Source
List,” then “BT Audio.”
2
Touch “BT Menu.”
In the case of Bluetooth Audio, touch “Play
Menu,” then “BT Menu.”
The Bluetooth setting menu appears.
In the case of Bluetooth Audio, touch “Play
Menu,” then “BT Menu.”
The Bluetooth setting menu appears.
3
Touch the desired item in the list and
configure the setting.
configure the setting.
The items in the Bluetooth setting menu are as
follows:
follows:
*1 Cannot be configured during a handsfree call.
*2 Depending on the cellular phone, this unit’s
*2 Depending on the cellular phone, this unit’s
ringtone may be output even if set to “Cellular.”
Note
For details on the setting of other Bluetooth devices,
refer to their respective manuals.
For details on the setting of other Bluetooth devices,
refer to their respective manuals.
Do this
To
Touch “Play
Menu”
Menu”
c “BT
Menu”
open the Bluetooth setting
menu (page 37).
menu (page 37).
Touch –/+ in the
“Level” box
“Level” box
reduce the volume level
differences between this
unit and the other Bluetooth
device. The level is
adjustable in single steps,
between –8 and +18.
differences between this
unit and the other Bluetooth
device. The level is
adjustable in single steps,
between –8 and +18.
Touch
“Connect”
“Connect”
connect to the last-
connected device from this
unit.
connected device from this
unit.
“Signal”*
1
Activates the Bluetooth signal: “ON,” “OFF.”
“Pairing”*
1
Turns the pairing mode on/off, and memorizes
the information between this unit and the
Bluetooth device.
the information between this unit and the
Bluetooth device.
“Auto Answer”*
1
Answers an incoming call automatically.
– “Short”: to answer automatically after 3
– “Short”: to answer automatically after 3
seconds.
– “Long”: to answer automatically after 10
seconds.
– “OFF”: to not answer automatically.
“Ringtone”*
1
*
2
Uses the ringtone of this unit or the connected
cellular phone: “Default,” “Cellular.”
cellular phone: “Default,” “Cellular.”
“EC/NC Mode” (Echo Canceller/Noise
Canceller Mode)
Canceller Mode)
Reduces echo and noise during a call.
For normal use, set to “Mode 1.”
If the outgoing sound quality is unsatisfactory,
set to “Mode 2.”
For normal use, set to “Mode 1.”
If the outgoing sound quality is unsatisfactory,
set to “Mode 2.”
“MIC Gain” (page 36)
Adjust the microphone volume for the other
party: “Low,” “Middle,” “High.”
party: “Low,” “Middle,” “High.”
“Initialize”*
1
Initializes all Bluetooth related settings. Touch
“Yes” to confirm.
“Yes” to confirm.