Sony CCD-TRV338 Manual
Du
b
b
b
in
g
/E
d
itin
g
g
Dubbing/Editing
67
Dubbing selected
scenes from a tape
scenes from a tape
– Digital program editing (
TRV280)
You can select up to 20 scenes (programs)
and record them in the desired order to other
recording device such as VCR.
and record them in the desired order to other
recording device such as VCR.
Step 1: Preparing your camcorder
and VCR for operation
and VCR for operation
Follow the steps below when you are
performing digital program editing for the
first time to a tape in a VCR. You can skip
this setting if you have set up the VCR by the
following procedure before.
performing digital program editing for the
first time to a tape in a VCR. You can skip
this setting if you have set up the VCR by the
following procedure before.
b
Notes
• You cannot perform the Digital program editing on
the following devices:
– a VCR that does not support [IR SETUP] codes
– a DVD recorder, a DVD recorder equipped with an
– a VCR that does not support [IR SETUP] codes
– a DVD recorder, a DVD recorder equipped with an
HDD, etc
• When your camcorder is connected to the VCR via
the DV Interface, you cannot record the title or
indicators.
indicators.
1
Connect your VCR to the camcorder
as a recording device (p. 60).
as a recording device (p. 60).
You can use either the A/V connecting
cable or the i.LINK cable to make the
connection. The dubbing procedure is
easier with the i.LINK connection.
cable or the i.LINK cable to make the
connection. The dubbing procedure is
easier with the i.LINK connection.
2
Prepare your VCR.
• Insert a cassette for recording.
• Set the input selector to input mode, if
• Set the input selector to input mode, if
your VCR has one.
3
Prepare your camcorder (playing
device).
device).
• Insert a cassette for editing.
• Slide the POWER switch repeatedly to
• Slide the POWER switch repeatedly to
select the PLAY/EDIT mode.
4
Press MENU.
5
Turn the SEL/PUSH EXEC dial to
select
select
(OTHERS), then press the
dial.
6
Turn the SEL/PUSH EXEC dial to
select [VIDEO EDIT], then press the
dial.
select [VIDEO EDIT], then press the
dial.
7
Turn the SEL/PUSH EXEC dial to
select [EDIT SET], then press the dial.
select [EDIT SET], then press the dial.
8
Turn the SEL/PUSH EXEC dial to
select [CONTROL], then press the
dial.
select [CONTROL], then press the
dial.
Change the order
Results of editing
Delete unwanted scene
VIDEO EDIT
MARK
UNDO
ERASE ALL
START
EDIT SET
MARK
UNDO
ERASE ALL
START
EDIT SET
1 IN
0:08:55:06
TOTAL 0:00:00:00
SCENE 0
SCENE 0
[MENU] : END
VIDEO EDIT
EDIT SET
CONTROL
ADJ TEST
”CUT–IN”
”CUT–OUT”
IR SETUP
PAUSEMODE
IR TEST
RETURN
EDIT SET
CONTROL
ADJ TEST
”CUT–IN”
”CUT–OUT”
IR SETUP
PAUSEMODE
IR TEST
RETURN
IR
0:08:55:06
[MENU] : END
VIDEO EDIT
EDIT SET
CONTROL
EDIT SET
CONTROL
IR
i. LINK
i. LINK
0:08:55:06
[MENU] : END
,continued