Sony PEG-SJ22 Manual

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Verify the following first

B Verify that 

 is set to 

 in the 

 

screen from 

.

B The IR port of both your CLIÉ handheld and the device must be facing 

each other.
Always point the IR port of your CLIÉ handheld at the IR port of the Palm 
OS

®

 PDA device.

B The distance between the two devices is not correct.

Verify that your CLIÉ handheld and the other Palm OS

®

 PDA devices are 

between 4 to 8 inches (approximately 10 to 20 centimeters) apart, and that 
the path between your CLIÉ handheld and the device must be 
unobstructed. The beaming distance to other Palm OS

®

 PDA devices or to 

your computer varies depending on the compatibility between the devices. 
Change the distance and then try again.

The error message for insufficient memory space is 
displayed when you receive data via beaming

B To receive data via beaming, you need free memory space in your CLIÉ 

handheld that is at least twice the size of the data you receive.
If the memory space is insufficient, delete any unnecessary data.

B Perform a soft reset by pressing the RESET button.

b

For details, refer to “Basic Operations of your Sony CLIÉ™ handheld: Restarting 

your Sony CLIÉ™ handheld” in “Read This First (Operating Instructions).”