Sony Dcr-hc96 Manual

Page of 140
129
E:\SONY\2659813111\01US09ADD.fm
DCR-HC36/HC46/HC96
2-659-813-11(1)
A
d
d
iti
o
n
a
l I
n
fo
rm
a
tio
n
• Keep the Remote Commander and button-type 
battery out of children’s reach. If the battery is 
accidentally swallowed, consult a doctor 
immediately.
• If the battery electrolytic liquid has leaked,
– consult your local authorized Sony service 
facility.
– wash off any liquid that may have contacted 
your skin.
– if any liquid gets in your eyes, wash with 
plenty of water and consult a doctor.
x
When not using your camcorder for a 
long time
• Periodically turn on the camcorder and play a 
cassette for about 3 minutes.
• Use up the battery pack completely before 
storing it.
Moisture condensation
If your camcorder is brought directly from a 
cold place to a warm place, moisture may 
condense inside your camcorder, on the 
surface of the tape, or on the lens. In this 
state, the tape may stick to the head drum 
and be damaged or your camcorder may not 
operate correctly. If there is moisture inside 
your camcorder, [%Z Moisture 
condensation. Eject the cassette] or [% 
Moisture condensation. Turn off for 1H.] 
appears. The indicator will not appear when 
the moisture condenses on the lens.
x
If moisture condensation has occurred
None of the functions except cassette 
ejection will work. Eject the cassette, turn 
off your camcorder, and leave it for about 
one hour with the cassette lid open. Your 
camcorder can be used again when both of 
the following conditions are met:
• The warning message does not appear when the 
power is turned on.
• Neither % or Z flash when a cassette is inserted 
and video operation buttons are touched.
If moisture starts to condense, your 
camcorder sometimes cannot detect 
condensation. If this happens, the cassette is 
sometimes not ejected for 10 seconds after 
the cassette lid is opened. This is not a 
malfunction. Do not close the cassette lid 
until the cassette is ejected.
x
Note on moisture condensation
Moisture may condense when you bring 
your camcorder from a cold place into a 
warm place (or vice versa) or when you use 
your camcorder in a humid place as shown 
below.
• When you bring your camcorder from a ski 
slope into a place warmed up by a heating 
device.
• When you bring your camcorder from an air 
conditioned car or room into a hot place outside.
• When you use your camcorder after a squall or a 
shower.
• When you use your camcorder in a hot and 
humid place.
x
How to avoid moisture condensation
When you bring your camcorder from a 
cold place into a warm place, put your 
camcorder in a plastic bag and seal it 
tightly. Remove the bag when the air 
temperature inside the plastic bag has 
reached the surrounding temperature (after 
about one hour).
Video head
• If the video heads are dirty, video or sound 
distortion may be apparent.
• If the following problem occurs, clean the video 
heads for 10 seconds with the Sony DVM-
12CLD cleaning cassette (optional).
– Mosaic-pattern noise appears on the playback 
picture or the screen is displayed in blue.
– Playback pictures do not move.
– Playback pictures do not appear or the sound 
breaks off.
– [x
 Dirty video head. Use a cleaning 
cassette.] appears on the screen during 
recording/playback.
Continued 
,