Sony Dcr-hc96 Manual

Page of 140
73
E:\SONY\2659813111\01US05BAS.fm
DCR-HC36/HC46/HC96
2-659-813-11(1)
Du
bbi
ng
/E
d
iti
n
g
1
Prepare your camcorder for 
playback.
Insert the recorded cassette.
For DCR-HC46/HC96:
Set [TV TYPE] according to the 
playback device (TV, etc.) (p. 43).
2
Prepare your VCR/DVD device for 
recording.
When dubbing to the VCR, insert a 
cassette for recording.
When dubbing to the DVD recorder, 
insert a DVD for recording.
If your recording device has an input 
selector, set it to the appropriate input 
(such as video input1, video input2).
3
Connect your VCR/DVD device to 
your camcorder as a recording 
device.
Connect your camcorder to the input 
jacks of a VCR or a DVD device.
4
Start playback on the camcorder, 
and recording on the VCR/DVD 
device.
Refer to the operating instructions 
supplied with your recording device for 
details.
5
When dubbing is complete, stop 
your camcorder and the VCR/DVD 
device.
• To record the date/time and camera settings data 
when connected by the A/V connecting cable, 
display them on the screen (p. 67, 68).
• The following cannot be output via the   DV 
Interface (i.LINK):
– Indicators
– Pictures edited using [PICT. EFFECT] 
(p. 62), [D. EFFECT] (p. 60) or PB zoom 
(p. 34).
• When connected using an i.LINK cable, the 
recorded picture becomes rough when a picture 
is paused on your camcorder while recording to 
a VCR.
• When connected using an i.LINK cable, data 
code (date/time/camera settings data) may not 
be displayed or recorded depending on the 
device or application.