Sony PEGA-TK500 Manual

Page of 2
English
WARNING
To prevent fire or shock hazard, do not expose the unit to rain or moisture.
To avoid electrical shock, do not open the cabinet. Refer servicing to qualified
personnel only.
Owner’s Record
The model and lot numbers are located on the bottom of your AC adapter. Record the lot
number in the space provided below. Refer to the model and lot numbers when you call
your Sony dealer regarding this product.
Model No. PEGA-AC510
Lot No.
This device complies with Part 15 of the FCC rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including any interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that any changes or modifications not expressly approved in this
manual could void your authority to operate this equipment.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
• CLIE and Jog Dial are trademarks of Sony Corporation.
• HotSync is a registered trademark, and the HotSync logo is a trademark of Palm, Inc.
or its subsidiaries.
• Microsoft
®
 and Windows
®
 are registered trademarks of Microsoft Corporation in the
United States and/or other countries.
• All other trademarks are trademarks of their respective owners.
Before use
The Travel Kit provides for convenient mobility, allowing you to use the CLIE handheld
wherever you go. With the Travel Kit, you can:
• Charge the battery with the AC adapter.
Since the supplied AC adapter automatically converts both frequency and voltage, an additional
converter is not needed when charging the battery. (AC 100 to 240 V, 50-60 Hz)
• Synchronize (HotSync
®
) data between the CLIE handheld and your computer by
using the USB HotSync cable.
Note
Do not connect the supplied AC adapter to the converter designed for traveling purposes. It may
result in an excessive heat and malfunction.
Charging directly from the power supply
When you connect the supplied AC adapter to the CLIE handheld, battery charging
automatically begins. The battery indicator in the Applications Launcher display changes
to 
 .
z
To use the AC adapter when traveling overseas, you may need to purchase the plug
adapter that allows plugging to desired country pin configuration.
To disconnect the AC adapter from your CLIE handheld
Connecting the USB HotSync cable
By using the USB HotSync cable, you can synchronize data between the CLIE handheld
and you computer.
Note
Make sure the Palm Desktop for Sony software is installed in your computer.
To disconnect the USB HotSync cable from your CLIE handheld
Performing local HotSync
1
Click 
 icon in the task tray at the bottom right corner of the
Microsoft
®
 Windows
®
 Desktop and make sure that Local is
checked in the shortcut menu.
Tip
If the 
 icon is not displayed in the task tray, start the HotSync manager by clicking
Start - Program - Sony handheld - HotSync manager.
2
Press the CLIE handheld power button.
3
Tap 
 icon.
4
Rotate the Jog Dial navigator to select HotSync and press the Jog
Dial navigator.
The HotSync dialog box appears on the screen.
5
Make sure Local is selected (not Modem) and tap V to select
Direct Serial.
6
Tap 
 icon of the CLIE handheld.
HotSync starts automatically.
When HotSync is finished, a HotSync completion message is displayed.
Specifications
AC Adapter
Input
100 - 240 V AC, 50 - 60 Hz, 150 m A
Output
5.7 V DC, 800 mA
Operating temperature
41˚F to 95˚F (5˚C to 35˚C)
Mass
Approx. 3.17 oz. (90 g)
Cord length
Approx. 70 
7
/
8
 inches (1.8 m)
USB HotSync Cable
Mass
Approx. 1.06 oz. (30 g)
Cord length
Approx. 39 
3
/
8
 inches (1 m)
Supplied accessories
AC adapter (1)
USB Hotsync cable (1)
Operating Instructions (1)
Warranty Card (1)*
Design and specifications are subject to change without notice.
* Depending on the country or region where you bought this product, this may not be
supplied.
Notes on use
• Do not place the unit in locations that are:
– Extremely hot or cold
– Dusty or dirty
– Very humid
– Vibrating
– Strong magnetic fields
– Sandy
– Exposed to direct sunlight
• Do not apply mechanical shock or drop the unit.
• Unplug the AC adapter from the AC outlet when not in use for a long time. To
disconnect the power cord, pull it out by the plug. Never pull the cord itself.
• Be sure that nothing metallic comes into contact with the metal parts of this unit. If this
happens, a short circuit may occur and the unit may be damaged.
• Do not operate the unit with a damaged cord or if it has been dropped or damaged.
• Always keep the metal contacts clean.
• Do not disassemble or convert the unit.
• While the unit is in use, it gets warm. This is normal.
• Keep the unit away from TV or AM receivers, as it will disturb reception.
On cleaning
Clean the unit with a soft dry cloth, or a soft cloth lightly moistened with a mild detergent
solution. Do not use any type of solvent, such as alcohol or benzine, which may damage
the finish.
使用上のご注意
置いてはいけない場所
使用中、保管中にかかわらず、次のような場所に置かないでください。
故障の原因になります。
異常に高温になる場所
炎天下や夏場の窓を閉め切った自動車内は特に高温になり、放置すると変形したり、故障したり
することがあります。
直射日光の当たる場所、熱器具の近く
変形したり、故障したりすることがあります。
激しい振動のある場所
強力な磁気のある場所
砂地、砂浜などの砂ぼこりの多い場所
海辺や砂地、あるいは砂ぼこりが起こる場所などでは、砂がかからないようにしてください。故
障の原因になるばかりか、修理できなくなることもあります。
使用について
強い衝撃を与えたり、落としたりしないでください。
• TV
AM
ラジオやチューナーの近くで使わないでください。
TV
やラジオ、チューナーに雑音が入ることがあります。
使用後は必ず
AC
アダプタをコンセントから抜いておいてください。
アダプタ本体やコード類の接点部に他の金属類が触れないようにしてください。ショートするこ
とがあります。
• AC
アダプタを海外旅行者用の「電子式変圧器」などに接続しないでください。
発熱や故障の原因となります。
お手入れについて
汚れがついたときは、柔らかい布やティッシュペーパーなどで、きれいに拭き取ってください。
汚れがひどいときは、水でうすめた中性洗剤に柔らかい布をひたし、固くしぼってから汚れを拭
き取り、乾いた布で仕上げてください。
アルコール、シンナー、ベンジンなどは使わないでください。変質したり、塗装がはげたりすることが
あります。
化学ぞうきんをご使用の際は、その注意書きに従ってください。
殺虫剤のような揮発性のものをかけたり、ゴムやビニール製品に長時間接触させると、変質した
り、塗装がはげたりすることがあります。
保証書とアフターサービス
保証書
この製品は保証書が添付されていますので、お買い上げの際、お確かめください。
所定事項の記入および記載内容をお確かめのうえ、大切に保存してください。
保証期間は、お買い上げ日より
1
年間です。
アフターサービス
調子が悪いときはまずチェックを
この取扱説明書をもう
1
度ご覧になってお調べください。
それでも具合の悪いときはサービスへ
お買い上げ店、または「ソニーご相談窓口のご案内」にあるお近くのソニーサービスの窓口にご相
談ください。
保証期間中の修理は
保証書の記載内容に基づいて修理させていただきます。ただし、故障の原因が不当な分解や改造で
あると判明した場合は、保証期間内であっても有償修理とさせていただきます。
詳しくは保証書をご覧ください。
保証期間経過後の修理は
修理によって機能が維持できる場合は、ご要望により有料で修理させていただきます。
部品の交換について
この製品は修理の際に交換した部品を再生、再利用する場合があります。
その際、交換した部品は回収させていただきます。
部品の保有期間について
当社ではトラべルキットの補修用性能部品(製品の機能を維持するために必要な部品)を、製造打ち
切り後最低
6
年間保有しています。
この部品保有期間を修理可能の期間とさせていただきます。保有期間が経過したあとも、故障箇所
によっては修理可能の場合がありますので、 ネットコミュニケーション
 
カスタマーリンク(ソニー
PDA
専用サポートセンター)にご相談ください。
ご相談になるときは次のことをお知らせください
型名:
PEGA-TK500
故障の状態:できるだけ詳しく
購入年月日:
Connect to the wall
outlet
Connect the AC adapter to
the interface connector
Pinch both sides of the
connector and pull out.
Connect the USB
HotSync cable to the
interface connector
Pinch both sides of the
connector and pull out.
Connect to the
USB connecter