Sony XA-CC1 Manual

3-257-674-11 (1)

Operating Instructions



 2003 Sony Corporation   

Printed in Japan

The XA-CC1 is a connection adapter for connecting a car cradle to a Sony master unit having the CD/
MD changer control function.

Car Cradle Ready Sony car audio units are ;

• Units with CD/MD Changer Control from 2003 forward
• Following units

Power requirement

12 V DC negative ground

Dimensions

Approx. 97.2 

×

 55.7 

×

 23.7 mm

(  3 

7

/

8

  

×

 2 

1

/

4

 

×

 

15

/

16

  in.)

(w/h/d)
(not including connection cable)

Mass

Approx. 260 g (10 oz.)
(including connection cable)

Input

Car cradle I/O input (8pin)

Output

SONY-BUS control output (8pins)
SONY-BUS audio output (RCA-pin)
ATT control output

Design and specifications are subject to change without notice.

•Choose the installation location carefully so that the unit does not interfere with normal driving

operations.

•Avoid installing the unit where it would be subject to :

— high temperatures, such as from direct sunlight or hot air from the heater.
— draft, rain or moisture.
— dust or dirt.
— magnetic fields.

•Install the unit at a to location that does not obstruct the operation of passenger-side airbag.

Install the unit inside the car panel or glove box is recommended.
Please consult qualified technician or service personnel if you cannot attach the connection adapter to
the car securely.

If you have any questions or problems concerning your unit that are
not covered in this manual, please consult your nearest Sony dealer.