Sony HDR-SR5/C Manual
18
5 Viewfinder lens adjustment lever (12)
(HDR-SR7/SR8)
(HDR-SR7/SR8)
6 ACCESS lamp (Hard disk)
When the ACCESS lamp is lit or flashing,
your camcorder is writing/reading data.
When the ACCESS lamp is lit or flashing,
your camcorder is writing/reading data.
7
(flash)
button
You can select the settings for the flash.
8 REMOTE jack
Connect other optional accessories.
Connect other optional accessories.
9 DC IN jack (9)
0 Hook for a shoulder belt
Attach the shoulder belt (optional).
Attach the shoulder belt (optional).
qa HDMI OUT (mini) jack
Connect with the HDMI cable (optional).
Connect with the HDMI cable (optional).
qs MIC (PLUG IN POWER) jack (HDR-
SR7/SR8)
When an external microphone (optional) is
connected, it takes precedence over the
internal microphone (p. 19).
SR7/SR8)
When an external microphone (optional) is
connected, it takes precedence over the
internal microphone (p. 19).
qd i (headphones) jack (HDR-SR7/SR8)
qf COMPONENT OUT jack
Connect with the component video cable.
Connect with the component video cable.
qg A/V OUT jack
Connect with the A/V connecting cable.
Connect with the A/V connecting cable.
qh Grip belt (12)
qj Active Interface Shoe
The Active Interface Shoe supplies power
to optional accessories such as a video light,
a flash, or a microphone. The accessory can
be turned on or off as you operate the
POWER switch on your camcorder.
The Active Interface Shoe supplies power
to optional accessories such as a video light,
a flash, or a microphone. The accessory can
be turned on or off as you operate the
POWER switch on your camcorder.
qk JACK COVER OPEN/CLOSE knob
ql Remote sensor/Infrared port
Receive the signal from the Remote
Commander.
Receive the signal from the Remote
Commander.
w; Camera recording lamp
Lights up in red during recording. Flashes
when remaining hard disk space or battery
power is low.
Lights up in red during recording. Flashes
when remaining hard disk space or battery
power is low.
wa Speaker
Sound comes out from the speaker while
playing back.
Sound comes out from the speaker while
playing back.
ws LCD screen/touch panel
To record in mirror mode, open the LCD
screen 90 degrees to the camcorder (1),
then rotate it 180 degrees to the lens side
(2).
To record in mirror mode, open the LCD
screen 90 degrees to the camcorder (1),
then rotate it 180 degrees to the lens side
(2).
wd START/STOP button (13)
wf Zoom buttons
Press for zooming in/out.
You can magnify still images from about
1.1 to 5 times the original size (Playback
zoom).
Press for zooming in/out.
You can magnify still images from about
1.1 to 5 times the original size (Playback
zoom).
• When you touch the screen during playback
zoom, the point you touched will be displayed in
the center of the displayed frame.
the center of the displayed frame.
wg
(HOME) button (22)
wh EASY button (14)
wj POWER switch (11)
wk /CHG
(charge)
lamp
Lights up while charging your camcorder,
or flickers while charging the flash, and
remains lit when the flash charging is
complete.
or flickers while charging the flash, and
remains lit when the flash charging is
complete.
wl
(Movie)/
(Still) mode lamps
e; Access lamp (“Memory Stick Duo”)
When the ACCESS lamp is lit or flashing,
your camcorder is writing/reading data.
When the ACCESS lamp is lit or flashing,
your camcorder is writing/reading data.
ea Battery pack (9)
es Memory Stick Duo slot (14)
ed
(VIEW IMAGES) button (15)