Sony HDR-SR5/C Manual

Page of 40
5
Notes
HDR-SR5, HDR-SR7 and HDR-SR8 are to be 
used with the Handycam Station Model DCRA-
C181 and AC Adaptor Model AC-L200/L200B.
CAUTION
You are cautioned that any changes or 
modifications not expressly approved in this 
manual could void your authority to operate this 
equipment.
Note
This equipment has been tested and found to 
comply with the limits for a Class B digital 
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable 
protection against harmful interference in a 
residential installation. This equipment generates, 
uses, and can radiate radio frequency energy and, 
if not installed and used in accordance with the 
instructions, may cause harmful interference to 
radio communications.
However, there is no guarantee that interference 
will not occur in a particular installation. If this 
equipment does cause harmful interference to 
radio or television reception, which can be 
determined by turning the equipment off and on, 
the user is encouraged to try to correct the 
interference by one or more of the following 
measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment 
and receiver.
– Connect the equipment into an outlet on a 
circuit different from that to which the receiver 
is connected.
– Consult the dealer or an experienced radio/TV 
technician for help.
The supplied interface cable must be used with the 
equipment in order to comply with the limits for a 
digital device pursuant to Subpart B of Part 15 of 
FCC Rules.
For the State of California, USA only
Perchlorate Material - special handling may 
apply, See
www.dtsc.ca.gov/hazardouswaste/perchlorate
Perchlorate Material: Lithium battery contains 
perchlorate.
• The camcorder is not dustproofed, dripproofed 
• To prevent the hard disk from being broken or 
recorded images from being lost, do not do the 
following when either of the 
 (Movie)/
 
(Still) mode lamps (p. 11) or the access lamp* is 
on:
– to remove the battery pack or AC Adaptor 
from the camcorder.
– to apply mechanical shock or vibration to the 
camcorder.
• When connecting your camcorder to another 
device with communication cables, be sure to 
insert the connector plug in the correct way. 
Pushing the plug forcibly into the terminal will 
damage the terminal and may result in a 
malfunction of your camcorder.
On recording
• Before starting to record, test the recording 
function to make sure the image and sound are 
recorded without any problems.
• Compensation for the contents of recordings 
cannot be provided, even if recording or 
playback is not possible due to a malfunction of 
the camcorder, recording media, etc.
• TV color systems differ depending on the 
country/region. To view your recordings on a 
TV, you need an NTSC system-based TV.
• Television programs, films, video tapes, and 
other materials may be copyrighted. 
Declaration of Conformity
Trade Name: SONY
Model No.: HDR-SR8
Responsible Party: Sony Electronics Inc.
Address: 16530 Via Esprillo, San Diego, CA 
92127 U.S.A
Telephone number: 858-942-2230
This device complies with Part 15 of the FCC 
Rules.
Operation is subject to the following two 
conditions:
(1) This device may not cause harmful 
interference, and (2) this device must accept any 
interference received, including interference 
that may cause undesired operation.
Notes on use