Sony CDX-CA850FP Manual
19
01US02CD-U.fm
masterpage:Right
CDX-CA860X/CA850X
3-229-198-11(1)
Changing the sound and
display settings
display settings
— Menu
The following items can be set:
Set Up
• Clock (page 9)
• Beep — to turn the beeps on or off.
• Multi language (language selection) — to
• Beep — to turn the beeps on or off.
• Multi language (language selection) — to
change the display language to English,
French, or Spanish.
French, or Spanish.
• P.Out 4.0V/5.5V— to change the pre-out of the
power amplifier to 4.0V or 5.5V. Selectable
only when the unit is turned off. (CDX-
CA860X only)
only when the unit is turned off. (CDX-
CA860X only)
Note
If the volume is turned up very high when connected
to a power amplifier, the sound may be distorted. In
this case, set P.Out to “4.0V.”
If the volume is turned up very high when connected
to a power amplifier, the sound may be distorted. In
this case, set P.Out to “4.0V.”
Display
• D.Info (Dual Information) — to display the
clock and the play mode at the same time (on).
Functions only when SA is not set to B-1 – B-5.
Functions only when SA is not set to B-1 – B-5.
• SA (Spectrum Analyzer) (page 21) — to
change the display pattern of the equalizer
display.
display.
• M.Dspl (Motion Display) — to select the
Motion Display mode from “1,” “2,” and “off.”
– Select “1” to show decoration patterns in the
– Select “1” to show decoration patterns in the
display and activate Demo display.
– Select “2” to show decoration patterns in the
display and deactivate Demo display.
– Select “off” to deactivate the Motion Display.
The Demo display in the M.Dspl 1 mode will
appear about 10 seconds after the unit is turned
off.
The Demo display in the M.Dspl 1 mode will
appear about 10 seconds after the unit is turned
off.
• Dimmer — to change the brightness of the
display.
– Select “Auto” to dim the display only when
– Select “Auto” to dim the display only when
you turn the lights on.
– Select “on” to dim the display.
– Select “off” to deactivate the Dimmer.
– Select “off” to deactivate the Dimmer.
• Contrast — to adjust the contrast if the
indications on the display are not recognizable
because of the unit’s installation position.
because of the unit’s installation position.
• A.Scrl (Auto Scroll)
– Select “on” to scroll all automatically
displayed names exceeding 8 characters.
– When Auto scroll is set to off and the disc/
track name is changed, the disc/track name
does not scroll.
does not scroll.
Sound
• HPF (High pass filter) — to select the cut-off
frequency to “off,” “78 Hz,” or “125 Hz.”
• LPF (Low pass filter) — to select the cut-off
frequency to “78 Hz,” “125 Hz,” or “off.”
• Loud (Loudness) — to enjoy bass and treble
even at low volumes. The bass and treble will
be reinforced.
be reinforced.
Play Mode
• Local on/off (Local seek mode) (page 14)
– Select “on” to only tune into stations with
stronger signals.
• Mono on/off* (Monaural mode) (page 14)
– Select “on” to hear FM radio/TV stereo
broadcast in monaural. Select “off” to return
to normal mode.
to normal mode.
• IF Auto/Wide (page 14)
*
This function cannot change the TV sound setting if
the optional TV tuner XT-40V is connected.
the optional TV tuner XT-40V is connected.
1
Press
(MENU)
.
To set A.Scrl, press (MENU) during CD/MD
playback.
playback.
2
Press either side of
(DISC)
repeatedly
until the desired item appears.
3
Press the (+) side of
(SEEK)
to select
the desired setting (Example: “on” or
“off”).
“off”).
4
Press
(ENTER)
.
After the mode setting is completed, the
display returns to normal play mode.
display returns to normal play mode.
Note
The displayed item will differ depending on the source.
The displayed item will differ depending on the source.
Tip
You can easily switch among categories by pressing
either side of
You can easily switch among categories by pressing
either side of
(DISC)
for 2 seconds.