Sony XM-D400P5 Specification Guide

Design and Specifications subject to change without notice.

POWER OUTPUT AND TOTAL HARMONIC DISTORTION
200 watts minimum continuous average power into 4 ohms, 20 Hz to 300 Hz with no more than
0.2% total harmonic distortion per Car Audio Ad Hoc Committee Standards.

Circuit system 

Class D Technology
Pulse power supply

Inputs 

RCA pin jacks
High level input connector

Input level adjustment range

0.3 – 6.0 V (RCA pin jacks) 1.2 – 12.0 V (high level input)

Outputs 

Speaker terminals, Through out pin jacks

Suitable speaker impedance 

2 – 8 W

Maximum outputs 

400 W (at 4 W)
800 W (at 2 W)

Rated outputs (supply voltage at 14.4 V)

200 W (20 Hz - 300 Hz, 0.2% THD, at 4 W)
400 W (20 Hz - 300 Hz, 0.6% THD, at 2 W)

Frequency response 

5 Hz – 300 Hz (+0.5 dB, -3 dB)

Harmonic distortion 

0.06% or less (at 100 Hz, 4 W)

Low-pass filter 

50 - 300 Hz, –12 dB/oct

Low Boost

0 - 10 dB (40 Hz)

Power requirements 

12 V DC car battery (negative ground)

Power supply voltage 

10.5 – 16 V

Current drain 

at rated output: 62 A (at 2 W)
Remote input: 2 mA

Dimensions 

Approx. 295 × 57 × 290 mm (11 5/8 × 2 1/4 × 11 1/2) (w/h/d)
not incl. projecting parts and controls

Mass 

Approx. 2.8 kg (6 lb. 3 oz.) not incl. accessories

Supplied accessories 

Mounting screws (5)
High level input cord (1)
Protection cap (1)

• 800W max power
• 200W x 1 RMS into 4W  20Hz - 300Hz @0.2% THD
• 400W x 1 RMS into 2W  20Hz - 300Hz @0.6% THD
• Class D
• Variable 50 - 300Hz 12dB/oct Low Pass Filter
• 40Hz EQ Boost
• RCA and Speaker Level Inputs