Sony XAV-V630BT Manual

GB

 It is extremely dangerous if the cord becomes 

wound around the steering column or gearstick. 
Be sure to keep it and other parts from interfering 
with your driving operations.

 If airbags or any other shock-absorbing 

equipment are in your car, contact the store 
where you purchased this unit, or the car dealer, 
before installation.

Note
Before attaching the double-sided tape 

, clean the 

surface of the dashboard with a dry cloth.

Installation of the connection cable RC-SR1 (not 
supplied) is required before use.

To enable the steering wheel remote control, select 
[General Settings] 

 [User Defined] to make the 

registration (page 19).
When the registration is complete, the steering 
wheel remote control becomes available.

 Refer to the support sites on the back cover for 

details, then connect each lead properly to the 
appropriate leads. Making an improper connection 
may damage the unit.

 Consulting the dealer or an experienced technician 

for help is recommended.

To enable the wired remote control, set [Steering 
Control] in [General Settings] to [Preset] (page 19).

Installation of the rearview camera (not supplied) is 
required before use.
The image of a rearview camera connected to the 
CAMERA IN terminal is displayed when:
 the back lamp of your car lights up (or the shift 

lever is set to the R (reverse) position).

 you press HOME, then touch [Rear Camera].

 you press and hold DSPL then touch [Rear 

Camera] if [SOURCE Key Func.] is set to [DSPL] 
(page 20).

When mounting in a Japanese car, see “Mounting 
the unit in a Japanese car” (page 37).

Before installing, make sure the catches on both 
sides of the bracket are bent inwards 3.5 mm (

5

/

32

 

in).

Position the bracket inside the 
dashboard, then bend the claws outward 
for a tight fit.

Mount the unit onto the bracket.

Note
If the catches are straight or bent outwards, the unit will 
not be installed securely and may spring out.