Sony MVC-CD500 Manual

• Do not use any solvent (benzine, thinner, 

static protection product, record cleaner, 
etc.) to clean a disc.

Do not remove the disc while reading or writing 
data.

Data may be damaged if:
– You remove the disc or shake the camera 

while reading or writing data.

– You turn off your camera while reading or 

writing data.

– You use the camera in a location subject to 

the effects of static electricity or noise.

Do not attach any material on the surface of a 
disc. This causes a nonuniform rotating speed, 
which may cause the camera to malfunction.

You can write only on the label surface of a 
disc. Write using only an oil-based felt-tip 
marker and do not touch the ink until dry. Do 
not heat the disc or use a sharp-pointed tool, 
such as a ballpoint pen.

Hold the disc at the edges while supporting the 
center hole lightly. Do not touch the recordable 
side (the reverse of the printed side) of a disc.

When you carry or store a disc, put it in its case.

Do not strike, bend, drop or rub the edge of a 
disc.

Do not store a disc in the following locations:
– In dusty or dirty places
– Exposed to direct sunlight
– Near heaters
– In damp places

If you attempt to play back a disc on which no 
images have been recorded using a CD-ROM 
drive, the CD-ROM drive may malfunction or 
the disc may be scratched.

The “InfoLITHIUM” battery pack is a 
lithium-ion battery pack that has functions 
for communicating information related to 
operating conditions between your camera 
and the AC Adaptor.
The “InfoLITHIUM” battery pack 
calculates the power consumption 
according to the operating conditions of 
your camera, and displays the remaining 
battery time in minutes.

We recommend charging the battery pack 
in an ambient temperature of between 10°C 
to 30°C (50

°F to 86°F). You may not be 

able to efficiently charge the battery pack 
outside of this temperature range.