Sony RCD-W1 Manual

RCD-W1 (US) 4-233-692-12(1)

Actual page number:

• A record-related button has been

pressed when a finalized disc is in
the DECK B.

• A record-related button has been

pressed when a standard CD is in
the DECK B.

A non-audio CD-ROM or a CD-
Video disc has been placed in the
machine.

• An unfinalized disc has been

placed in the DECK A.

• A DVD disc has been placed in

the unit.

There is not enough time left on the
disc to complete a planned
recording.

• The disc is not seated properly.

• There is a problem with the disc.

A dubbing has not been completed
properly.

More than 20 tracks have been
programmed.

A record-related button has been
pressed when a non-audio disc is in
the DECK B.

If the inserted recordable CD-R/RW is brand new,
“TOC” appears in the front panel display longer than
for CD-R/RWs that have been used.

• The correct remaining recording time may not be

displayed.

• You may find it impossible to record over a track if

that track has been recorded over several times
already.

• The remaining recording time may be shortened

out of proportion to the total recorded time.

• Recording over a track to eliminate noise is not

recommended since this may shorten the duration
of the track.

• You may find it impossible to label a track after

recording over a previous one.

• You can record songs for up  to 99 tracks.

CHECK DISC

DATA DISC

DISC ERROR

DISC FULL

ERROR

FAILED

FULL

NO AUDIO

The following table explains the error messages
that appear in the display.

When you make a connection through DIGITAL
OUT of the recorder to a recording appliance (MD,
DAT, etc.), the track number may not be recorded
correctly. In this case, use DECK A for playback.

When you turn on the recorder, you will hear some
mechanical noise from the recorder.  This is not a
malfunction.

07ADD_RCD-W1.p65

00.12.14, 2:47 PM

24