Sony WX-GT90BT Manual

25

perform the pairing procedure from the 
beginning again.

• This unit cannot be connected to a device that 

supports only HSP (Head Set Profile).

Connection between this unit and the Bluetooth 
device may be automatic, depending on the 
device.

Canceling pairing
Perform step 2 to cancel the pairing mode 
after this unit and the Bluetooth device are 
paired.

To use the device after pairing is made, start 
the connection. Sometimes pairing allows 
for connection automatically.
If pairing has already been achieved, start 
operation from here.

 and rotate the control 

dial until “BT SIGNL” appears, then 
press it.
“

” lights up when Bluetooth signal is 

activated.

When the Bluetooth signal for this unit is 
already ON, selecting “BT SIGNL” deactivates 
the Bluetooth signal.

You can also output the Bluetooth signal from 
this unit by pressing and holding 

 on 

this unit more than 2 seconds.

Connect to this unit using the cellular 
phone.
“

” appears when the connection is 

made. If you select the Bluetooth phone 
source after the connection is made, the 
network name and the connected 
cellular phone name appear in the 
display.

Icons in the display:

* Turns off without handsfree connection. 

Differs depending on the cellular phone.

Changing display items
Press 

.

 repeatedly until “BT 

 (ENTER).

Signal strength status of 
connected cellular phone.*

Remaining battery status of 
connected cellular phone.*