Sony PCV-RS220 Manual

 

 

 

1/2

 

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

  Rotate the PC so 

the inside is facing to you. 
Identify the location of the Hard 
Drive’s connections. 

. 

Place your PC on a 

solid surface.  

Disconnect the 

power cord. Failure to do so can 
result in unit damage or personal 
injury. 

Using the enclosed magnetic 
screwdriver, remove the marked 
screws (3) and set them aside. 

  To remove the cover, hold both 

sides of the computer as shown and slide it 
towards you. Grab bottom edges of the cover 
and carefully spread them out and then lift up 
the cover. 

1

1

2

2

Remove 3 

screws 

 

These easy instructions are intended to guide you through the replacement process.  

 

9 

To avoid electric shock please make sure product is turned off and disconnected from the power 
source. Remove jewelry before you begin work to avoid scratching the surface of your desktop 
computer.* 

 

9 

Place your desktop computer on a clean, stable and covered surface to avoid damage to the 
computer's case.

*

 

 

9 

Follow the ESD (Electrostatic Discharge) damage prevention instructions: 

o

 

Hold parts by the edges, away from exposed circuitry when possible. 

o

 

Do not walk around excessively as this promotes static build-up. 

 

9 

The appearance of the electronic components shown in the illustrations may be different from the 

components shipped. This slight difference does not affect the accuracy of these instructions.  

 
* Sony is not responsible for any loss of data associated with your computer or any damage caused by 
incorrect handling of the computer under these procedures. The terms of your Sony Limited Warranty 
continue to apply.