Sony XM-N1004 Specification Guide
The Sony
®
XM-N1004 amplifier affords incredible installation flexibility and packs quite a
punch.
Specifications
4/3/2 Channel 1000W Amplifier
• 70W x 4 RMS at 4 Ohms
1
• 85W x 4 RMS power at 2 Ohms
• 70W x 2 + 175W x 1 RMS at 4 Ohms
• 170W x 4 max power at 4 Ohms
• 500W x 2 max power at 4 Ohms
• 70W x 2 + 175W x 1 RMS at 4 Ohms
• 170W x 4 max power at 4 Ohms
• 500W x 2 max power at 4 Ohms
• 1000 Watts Max Power
• Selectable HPF and LPF
• Automatic Thermal Control
• Single sided connections
• Selectable HPF and LPF
• Automatic Thermal Control
• Single sided connections
Amplifier Section
Max power output
1000W max power
Power Ad Hoc
70W per channel at 4 Ohms from 20Hz-20kHz with 1%
THD
1
Speaker
Impedance
2-8 Ohm stereo
4-8 Ohms mono
4-8 Ohms mono
Audio
Band
Front crossover: selectable 12dB/oct HPF/LPF @ 80 HZ
Rear crossover: 18dB/oct HPF/LPF @ 80 HZ
Rear crossover: 18dB/oct HPF/LPF @ 80 HZ
Circuit System
OTL (Output Transformerless) circuit
Pulse Power Supply
Pulse Power Supply
Frequency
Response
5 Hz - 50 Khz (+0/-3 db)
Harmonic
Distortion
0.05% (1kHz @ 4 ohm)
Impedance
2-8 Ohm stereo
4-8 Ohms mono
4-8 Ohms mono
Input Level
0.3 - 6.0V (RCA input)
Power Supply
OTL (Output Transformerless) circuit
Pulse Power Supply
Pulse Power Supply
Signal Circuitry
Selectable HPF/LPF crossovers
Signal-to-Noise
Ratio (dB)
93 dBA
Audio Features
Level Control
0.3 - 6.0V (RCA input)
Inputs and Outputs
Audio In
RCA Pin Jacks
Audio Out
Speaker Terminals
Input(s)
RCA Pin Jacks
Line Level Input(s)
RCA pin jacks
Output(s)
Speaker Terminals
RCA Audio
Input(s)
Pin Jacks: 0.3 - 6V
Power
Current Drain
At rated output: 36A (at 4 Ohms)
Remote Input: 1 mA
Remote Input: 1 mA
Input Voltage
10.5-16V Power Supply Voltage
Internal Power
Supply
OTL (Output Transformerless) circuit
Pulse Power Supply
Pulse Power Supply
Features
Automatic Thermal Control
Other amps thermal protection circuits will simply shut down until they're cool. Sony's Automatic Thermal Control circuit
actually lowers the output levels to reduce amplifier temperature so your music continues to play.
Efficient Cooling Design
The unique thermal control chassis is designed to circulate air and cool the amplifier for powerful sound output.
High Quality Coponents
Components such as audio capacitors, power MOSFETs and choke coils are carefully selected for high quality sound
reproduction as well as reliability.
LPF / HPF Crossovers
To get the full benefit of your speakers, you'll need to send them the appropriate musical frequencies. The integrated High
Pass Filter (HPF) sends everything but the deepest bass to the full-range speakers while the Low Pass Filter (LPF) sends only
the deep bass to the subwoofers.
Single Sided Connections
Single sided connections provide flexible installation and multiple mounting options.
XM-N1004
Bullets