Sony HCD-GS100 Manual
30
US
Specifications
Amplifier section
U.S.A. model:
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
HARMONIC DISTORTION:
with 6 ohms loads both channels driven, from
120 – 10,000 Hz; rated 50 watts per channel
minimum RMS power, with no more than 10%
total harmonic distortion from 250 milliwatts to
rated output.
120 – 10,000 Hz; rated 50 watts per channel
minimum RMS power, with no more than 10%
total harmonic distortion from 250 milliwatts to
rated output.
Continuous RMS power output
50 + 50 watts
(6 ohms at 1 kHz,
10% THD)
(6 ohms at 1 kHz,
10% THD)
Total harmonic distortion less than 0.09%
(6 ohms at 1 kHz,
30 watts)
30 watts)
Inputs
VIDEO (MD) (phono jacks):
VIDEO (MD) (phono jacks):
voltage 250 mV/450 mV,
impedance 47 kilohms
impedance 47 kilohms
Outputs
PHONES (stereo phone jack):
PHONES (stereo phone jack):
accepts headphones of
8 ohms or more
8 ohms or more
SPEAKER:
accepts impedance of 6 to
16 ohms
16 ohms
CD player section
System
Compact disc and digital
audio system
audio system
Laser
Semiconductor laser
(
(
λ
= 780 nm)
Emission duration:
continuous
continuous
Frequency response
2 Hz – 20 kHz (±0.5 dB)
Wavelength
780 – 790 nm
Signal-to-noise ratio
More than 90 dB
Dynamic range
More than 90 dB
Tape player section
Recording system
4-track 2-channel stereo
Frequency response
40 – 13,000 Hz (±3 dB),
using Sony TYPE I
cassette
using Sony TYPE I
cassette
Wow and flutter
±0.15% W.Peak (IEC)
0.1% W.RMS (NAB)
±0.2% W.Peak (DIN)
0.1% W.RMS (NAB)
±0.2% W.Peak (DIN)
Tuner section
FM stereo, FM/AM superheterodyne tuner
FM tuner section
Tuning range
87.5 – 108.0 MHz
Antenna
FM lead antenna
Antenna terminals
75 ohms unbalanced
Intermediate frequency
10.7 MHz
AM tuner section
Tuning range
530 – 1,710 kHz
(with the interval set at
10 kHz)
531 – 1,710 kHz
(with the interval set at
9 kHz)
(with the interval set at
10 kHz)
531 – 1,710 kHz
(with the interval set at
9 kHz)
Antenna
AM loop antenna
Antenna terminals
External antenna terminal
Intermediate frequency
450 kHz
Speaker
Speaker system
3-way, bass-reflex type
Speaker units
Woofer:
Woofer:
13 cm, cone type
Tweeter:
5 cm, cone type
Super Tweeter:
2 cm, dome type
Nominal impedance
6 ohms
Dimensions (w/h/d)
Approx. 210
×
325
×
241 mm
Mass
Approx. 2.8 kg net per
speaker
speaker
General
Power requirements:
120 V AC, 60 Hz
Power consumption:
100 watts
Dimensions (w/h/d) incl. projecting parts and
controls:
controls:
Approx. 280
×
325
×
465 mm
Mass :
Approx. 8.8 kg
Supplied accessories:
Remote commander (1)
Batteries (2)
AM loop antenna (1)
FM lead antenna (1)
Batteries (2)
AM loop antenna (1)
FM lead antenna (1)
Design and specifications are subject to change
without notice.
without notice.