Sony LSPX-WSP Manual

• Set “Speaker” to “On” in Function Menu of the LSPX-W1 Video Projector or the compatible video 

projector to output the sound from the speakers.

• Before connecting the cable, be sure to turn off the Video Projector and disconnect the AC power cord.
• Be sure to use the supplied speaker cords.

You can adjust the height by using the four feet at the bottom of the speaker.
For more details, refer to the operating instructions of the LSPX-W1 Video Projector or the compatible 
video projector.

• Use a wrench with a 13 mm nominal diameter double-surface width or the adjustment tool included with 

the LSPX-W1 Video Projector or the compatible video projector to adjust the feet.

• If the foot height is more than 35 mm, the foot may come off and the speaker may slant and result in 

injury.

Speaker system

2 way speaker system

Loud speaker units

Woofer: 130 mm (5 1/8 in.), cone type
Tweeter: 19 mm (3/4 in.), dome type

Enclosure type

Bass reflex

Rated impedance

8 ohms

Maximum input power

40 watts

Effective Frequency Range

40 Hz - 20 kHz

Dimensions (w/h/d)

Approx. 200 mm × 265 mm × 535 mm
(7 7/8 in. × 10 1/2 in. × 21 1/8 in.)

Mass

Approx. 9.7 kg (21 lb. 6.2 oz)

Supplied accessories (Refer to “Checking the supplied accessories.”)

Operating Instructions (this manual, 1)
Speaker cords (2)

Design and specifications are subject to change without notice.

+ terminal (red)

- terminal (black)

Right speaker 
(rear side)

Left speaker 
(rear side)

Video Projector (rear side)

Speaker cord 
(supplied)

Speaker cord 
(supplied)

Red

White

Foot 
height

Fixing nut

Adjusting nut

Foot

Side