Sony PCV-RX780 Manual

Page of 93
VAIO Digital Studio Computer User Guide
60
i.LINK
 
(IEEE1394) Compatibility
Your VAIO computer may include either 4-pin or 6-pin, or both types, of i.LINK 
ports.
A 6-pin i.LINK port can:
supply power from the computer to the connected device if the device is 
equipped with a 6-pin connector.
supply 10V to 12V.
A 4-pin i.LINK port cannot supply power to a connected device.
The following Sony i.LINK 400 Mbps cables are available and recommended for 
use with your computer: VMC-IL4415, VMC-IL4435, VMC-IL4615, 
VMC-IL4635, VMC-IL6615, and VMC-IL6635. 
Sony computer supplies, accessories, and peripherals can be purchased from your 
local retailer, from the Sony VAIO Direct Web site at http://vaio.sonystyle.com, 
or by calling 1-888-315-7669 (toll free).
Connecting an i.LINK (IEEE1394) device
1
Use the   symbol to locate the i.LINK
 
port on your compatible i.LINK 
device and on your computer. Plug the i.LINK cable connector into this port. 
2
Plug the other end of the cable into the corresponding 4- or 6-pin i.LINK 
port on your computer.
i.LINK is a trademark of Sony used only to designate that a product contains an 
IEEE1394 connection. The i.LINK connection may vary, depending on the software 
applications, operating system and compatible i.LINK devices. All products with an 
i.LINK connection may not communicate with each other.
Please refer to the documentation that came with your compatible i.LINK device for 
information on operating conditions and proper connection. Before connecting 
compatible i.LINK PC peripherals to your system, such as an optical or hard disk drive, 
confirm their operating system compatibility and required operating conditions.
The total power supplied by the 6-pin i.LINK port cannot exceed 6 watts.
See the instructions that came with your i.LINK device for more information on 
installation and use.