Sony PCV-W600G Manual

Your VAIO

®

 computer may be equipped with a 4-pin and/or a 6-pin i.LINK

®

 port, depending on the system configuration

purchased. A 4-pin i.LINK port cannot supply power to a connected i.LINK device. A 6-pin i.LINK port can supply power (10V
to 12V) to a connected i.LINK device, if the device is equipped with a 6-pin connector. 

To view the hardware configuration for your computer, see the online 

   

Your PCV-W series computer has one 4-pin i.LINK port available to connect your digital devices. A 4-pin i.LINK port cannot
supply power to a connected i.LINK device. 

  

 

i.LINK is a trademark of Sony used only to designate that a product contains an IEEE 1394 connection. The i.LINK

connection may vary, depending on the software programs, operating system and compatible i.LINK devices. All products
with an i.LINK connection may not communicate with each other. 

Refer to the documentation supplied with your compatible i.LINK device for information on operating conditions and proper
connection. Before connecting compatible i.LINK devices to your system, such as an optical or hard disk drive, confirm their
operating system compatibility and required operating conditions. 

1.

Use the 

symbol to locate the i.LINK port on your compatible i.LINK device and on your computer. Plug the i.LINK

cable connector into this port. 

2.

Plug the other end of the cable into the corresponding 4- or 6-pin i.LINK port on your computer. 

  

 See the instructions supplied with your i.LINK device for more information on installation and use.