Sony VGC-RB30 Manual

 

 

                         

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Step  5. Using the enclosed magnetic 
screwdriver, remove the two (2) 
screw s from the optical drive you are 
rep lacing. (In this example: the upper 
optical drive.) 

Step  6. Pull out the original optical drive 
from the chassis in the direction of the 
arrow. 

 

Step 7. Carefully slide the new optical 
drive into the newly vacant space in the 
chassis, making sure the screw holes are 
aligned. 

 

Step  8. Using the enclosed magnetic 
screwdriver, reinstall the  previously 
removed screws following the above 
sequence. ( In this example: the upper 
optical drive.)  

IMPORTANT!  Do not 

over tighten the screws!

 

Step 9. Reconnect the IDE data cable [ 1] and the power cable [2]  to the new optical disk 
drive you have replaced. (In this example: the lower optical drive.) 

 

Step  10. Reinstall the front panel to its 
original position , as shown. 

 

Step  11. Reinstall the left chassis cover panel in the direction of arrow. Then using the 
enclosed magnetic screwdriver, reinstall the two (2) previously removed screws. 

IMPORTANT!  Do not over tighten the screw s! 

Return the original optical disk drive to 

Sony following the included shipping instructions  

 

 

 

2 

Screws