Sony PCGC1MW Manual
Installing a Memory Module
97
Installing a Memory Module
1
Perform steps 1 through 4 as described in the “Removing a Memory
Module” section.
Module” section.
2
Touch a metal part of the computer (such as the connector panel on the back
of your computer) to discharge any static electricity accumulated on your
body, then remove the module from its protective package.
of your computer) to discharge any static electricity accumulated on your
body, then remove the module from its protective package.
3
Install the memory module by holding the module edge connector pointing
down with the notch on the right, and then insert it diagonally into the empty
slot.
down with the notch on the right, and then insert it diagonally into the empty
slot.
4
Lower the memory module until it clicks into place on both ends.
To avoid damaging the computer, do not remove or loosen any other screws.
A Memory Module
Notch
Edge Connector