Sony PCG-FXA63 Manual

Page of 162
7.
Click to select the Network Authentication (Shared mode) check box. 
8.
Click to cancel the The key is provided for me automatically check box. 
9.
Type between 5 and 13 ASCII characters or 10 to 26 hexadecimal characters in the Network key box. 
10. Click OK. Your new network name appears in the Preferred networks list box. 
To set up a computer-to-computer (ad-hoc) network 
1.
Insert a Wireless LAN PC Card into the PC Card slot. See 
The Wireless LAN indicator lights up. 
2.
From the Start menu, click Control PanelNetwork and Internet Connections, and then click Network
Connections
. The Network Connections window appears. 
3.
Right-click Wireless Network Connection, and select Properties. The Wireless Network Connection Properties
dailog box appears. 
4.
Click the Wireless Networks tab, and then click Add. The Wireless Network Properties dialog box is updated. 
  Setting Wireless Network Connection Properties 
5.
Type up to 32 ASCII characters in the Network name (SSID) box. 
6.
Click to select the Data encryption (WEP enabled) check box. 
7.
Click to select the Network Authentication (Shared mode) check box. 
8.
Click to cancel the The key is provided for me automatically check box. 
9.
Type between 5 to 13 ASCII characters or 10 to 26 hexadecimal characters in the Network key box. 
10. Click to select the This is a computer-to-computer (ad-hoc) network; wireless access points are not used
check box. 
11. Click OK. Your new network name appears in the Preferred networks window. 
To disconnect from a wireless network 
For computers with built-in Wireless LAN functionality, open the Wireless Network Connection Status window, and
click Disable. See 
Wireless LAN indicator turns off. 
For Wireless LAN PC Card connections, open the Wireless Network Connection Status window, and click Disable.
See 
Page 32