Sony PCG-GRS170 User Guide

Page of 208
Using PC Cards
119
4
Make sure the PC Card is selected, and click OK. A message appears stating
it is safe to remove the hardware device.
5
Push the Release button. The Release button pops out.
6
Push the Release button a second time. The PC Card pops out.
7
Gently pull the card out of the slot.
To remove a PC Card while the computer is off
1
Push the Release button once. The Release button pops out.
2
Push the Release button a second time. The PC Card pops out.
3
Gently pull the card out of the slot.
To remove slot protectors
1
Push the Release button once. The Release button pops out.
2
Push the Release button a second time. The slot protector pops out.
3
Pull the protector out of the slot. If you use a Type III PC Card, you need to
remove both the top and bottom PC Card slot protectors.
Connecting and disconnecting PC Card drives
The PC Card drive enables you to read data stored on a DVD or CD. Your
computer may come with an external PC Card drive, depending on the model you
purchased. If you wish to purchase an optional PC Card drive, shop Sony online
at http://www.sonystyle.com/vaio or contact your local retailer.
To connect an PC Card drive
You can connect a PC Card drive while the computer is turned on. Connecting
the drive when the computer is in a power saving mode (Standby or Hibernate)
may cause the computer to malfunction.
If you connect a non-Sony DVD drive to your VAIO® computer, DVD playback 
may not function properly. The supplied DVD software must be installed to 
play a DVD. For best performance, use a Sony compatible DVD drive.
Instructions on connecting an optical drive may vary, depending on the specific drive 
you purchased.