Sony PCG-R505DF Manual
VAIO® R505 SuperSlim Pro™ Notebook Quick Start
120
Troubleshooting the Docking Station
I cannot operate the optical drive in the docking station when
the docking station is connected to the notebook.
the docking station is connected to the notebook.
To set the i.LINK® network switch:
1
Disconnect your notebook from the docking station.
2
Disconnect the AC adapter and all cables from your docking station.
3
Set the i.LINK® network switch on the bottom of the docking station to the
unmarked side with a thin pen tip.
unmarked side with a thin pen tip.
4
Connect the docking station to the notebook.
5
Turn on your notebook.
I cannot operate the optical drive in the docking station when
the docking station is connected to the notebook and the
notebook is connected to another computer via an i.LINK
connection.
the docking station is connected to the notebook and the
notebook is connected to another computer via an i.LINK
connection.
Set the i.LINK® network switch at the bottom of the docking station to the
marked
marked
side. See “Connecting the Docking Station” for more information.
An error message appears while disconnecting the docking
station, even after following the correct procedure for
disconnecting the docking station.
station, even after following the correct procedure for
disconnecting the docking station.
Close the software in use, disconnect other devices being used, then try to
disconnect the docking station from the notebook.
disconnect the docking station from the notebook.
✍
Do not set the i.LINK network switch when the notebook is on. This causes the
notebook to malfunction.
notebook to malfunction.
Set the i.LINK network switch after removing all cables connected to the docking
station.
station.