Sony PCG-R505DLK Manual
Change text in this variable definition to document title.
28
6
Press the PC Card Release button a second time (in some cases). Remove the
card.
card.
Notes on using PC Cards
❑
For some PC Cards, if you alternate between normal power operation and
the Standby or Hibernate modes while the card is inserted, you may find that
a device connected to your system is not recognized. Reboot your system to
correct the problem.
the Standby or Hibernate modes while the card is inserted, you may find that
a device connected to your system is not recognized. Reboot your system to
correct the problem.
❑
Some PC Cards may require that you disable idle devices when using the PC
Card. You can use Sony Notebook Setup to disable devices. See “To display
the Sony Notebook Setup screen” for more information.
Card. You can use Sony Notebook Setup to disable devices. See “To display
the Sony Notebook Setup screen” for more information.
❑
Make sure you use the most recent software driver provided by the PC Card
manufacturer.
manufacturer.
❑
If an exclamation mark (!) appears on the Device Manager tab in the System
Properties dialog box, remove the software driver and then reinstall it.
Properties dialog box, remove the software driver and then reinstall it.
Removing PC Card
Do not choose a USB disk or a Sony i.LINK® optical drive in the Stop a
Hardware device dialog box.
Hardware device dialog box.
If you removed a Sony i.LINK optical drive by mistake, disconnect the docking
station and reconnect it. See “Disconnecting the notebook from the docking
station” for more information.
station and reconnect it. See “Disconnecting the notebook from the docking
station” for more information.
PC Card Release button