D-Link DAS-3224_revB Software Guide
錯誤! 尚未定義樣式。
39
Configuring the GARP Port Info
Use ‘modify grap port info’ command to identify the GARP parameters of specific Bridge port
interface.
interface.
Table 7-3
Configuring the GARP Port Info
Use this command to modify the GARP port parameters.
#modify garp port info portid <portid> [jointimer jointimer] [leavetimer leavetimer] [leavealltime leavealltime]
Use this command to get the GARP port parameters.
#get garp port info [portid portid]
Parameters
Task
portid <portid>
Index of the Bridge port
Valid values: 1 ~ 386
[jointimer jointimer]
The GARP join time. In centi-seconds. Join time value should be less than half the leave time value
Type: Optional
Default values: 10 ~ 255
[leavetimer leavetimer]
The GARP leave time, in centi-seconds. Leave time value shall be greater than 2 times join time
value.
value.
Type: Optional
Default values: 10 ~ 255
[leavealltime leavealltime]
The GARP leave all time, in centi-seconds. Leave all time value should be large (more than 15 times)
relative to leave time value.
relative to leave time value.
Type: Optional
Default values: normal
DAS3series IP-DSLAM
System Configuration Guide
System Configuration Guide