D-Link DAS-3224_revB User Manual
14
DAS3series LCT Operation Menus
Table 3-4
Monitoring the System Statistics Information
Item
Description
CPE Ucast Addr Count
Number of unicast addresses, which were learned from the CPE ports.
DnLink Ucast Addr Count
Number of unicast addresses, which were learned from the downlink port.
Net Ucast Addr Count
Number of unicast addresses, which were learned from the network ports.
Ucast Lookup Fail Count
Number of times unicast address lookup failed.
Mcast Lookup Fail Count
Number of times multicast address lookup failed.
Bridging Status Setup
The bridging status in this field control entire system’s bridging behaviors. There are three modes of
bridging: residential, restricted, and unrestricted.
bridging: residential, restricted, and unrestricted.
Figure 3-7
Bridging Status Setup Dialog
The residential bridging will direct packets coming from CPE side to be forwarded to the network
side port without a lookup. This is the most commonly used mode.
The restricted bridging will direct the packets undergo a MAC address lookup and if the destination is
another CPE port, the packets would be dropped. Thus, CPE to CPE traffics are not allowed.
The unrestricted bridging will force packets to be forwarded based MAC address lookup under all
cases.
DAS3series IP-DSLAM
System Configuration Guide