D-Link DAS-3216_revB Software Guide
14
錯誤! 尚未定義樣式。
System Administrating
The system administrating provides command for you to logout the Telnet session or reboots the
system device. The system prompt can also be change to user identify.
system device. The system prompt can also be change to user identify.
System Reboot
The reboot command activates the software restart of system device. The configuration change will be
lost if you did not committed it.
lost if you did not committed it.
Table 3-5
System Reboot Command
Use this command to commit the active configuration to the system flash.
#reboot
Telnet Session Logout
Use this command to terminate the Telnet session from CLI Ex mode, logout, quit, and exit will bring
you the same effects.
you the same effects.
Table 3-6
Telnet Session Logout Command
Use this command to exit from the CLI Ex if accessed via Telnet.
#logout | quit | exit
Configuring the System Prompt
CLI Ex prompt can be change up on user identify, use the command below to modify.
Table 3-7
System Prompt Command
Use this command to set the new CLI Ex prompt.
#prompt <new-prompt>
Parameters
Task
prompt <new-prompt>
The new prompt string
Type: Mandatory
Valid values: String of up to 19 characters (All characters except ‘;’, ‘?’, and empty space)
DAS3series IP-DSLAM
System Configuration Guide